Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T06:41:18.584Z Has data issue: false hasContentIssue false

Utilization of Ultrasonic Measurements to Quantify Aging-Induced Material Microstructure and Property Changes

Published online by Cambridge University Press:  21 February 2011

Steven R. Doctor
Affiliation:
Pacific Northwest Laboratory, P. 0. Box 999, Richland, WA 99352
Stephen M. Bruemmer
Affiliation:
Pacific Northwest Laboratory, P. 0. Box 999, Richland, WA 99352
Morris S. Good
Affiliation:
Pacific Northwest Laboratory, P. 0. Box 999, Richland, WA 99352
Larry A. Charlot
Affiliation:
Pacific Northwest Laboratory, P. 0. Box 999, Richland, WA 99352
T. Thomas Taylor
Affiliation:
Pacific Northwest Laboratory, P. 0. Box 999, Richland, WA 99352
Donald M. Boyd
Affiliation:
Pacific Northwest Laboratory, P. 0. Box 999, Richland, WA 99352
John D. Deffenbaugh
Affiliation:
Pacific Northwest Laboratory, P. 0. Box 999, Richland, WA 99352
Larry D. Reid
Affiliation:
Pacific Northwest Laboratory, P. 0. Box 999, Richland, WA 99352
Get access

Abstract

Many structural components are exposed to thermal environments that promote aging-induced changes in material microstructure and properties. The extent of these changes may lead to a reduction in the design safety factors and, as a worst case, premature failure of the component. In order to illustrate how nondestructive measurements can be used to indicate these changes, ultrasonic measurements were conducted on stainless steel. Specimens from a high-carbon, Type 304 stainless steel were subjected to various thermal treatments to introduce differing precipitation morphologies. Specimens were examined using transmission electron microscopy to quantify the size, density, and distribution of the precipitates formed. Ultrasonic measurements were performed to assess sensitivity to the change in precipitation levels. Shear-wave birefringence provided the most consistent measurements for tracking precipitate morphology changes. Birefringence velocity differences increased as precipitate size and density increased on grain boundaries and as additional precipitates formed in the matrix. The ability to nondestructively monitor the precipitation process is important since susceptibility to environmentally assisted cracking and low-temperature embrittlement correlated with this microstructural change.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable