Hostname: page-component-7b7567c8c-9cwtv Total loading time: 0 Render date: 2026-11-19T08:10:26.386Z Has data issue: false hasContentIssue false

Validation of a Nuclear Waste Repository Performance Assessment Model:Comparison of Theory With Experiment

Published online by Cambridge University Press:  28 February 2011

R. W. Geldart
Affiliation:
Pacific Northwest Laboratory, P. O. Box 999, Richland, WA 99352
B. P. Mcgrail
Affiliation:
Pacific Northwest Laboratory, P. O. Box 999, Richland, WA 99352
K. C. Rhoads
Affiliation:
Pacific Northwest Laboratory, P. O. Box 999, Richland, WA 99352
M. J. Apted
Affiliation:
Pacific Northwest Laboratory, P. O. Box 999, Richland, WA 99352
Get access

Abstract

Laboratory tests were conducted to validate a radionuclide mass transfer model. During the experiments, cesium and uranium releases from a simulated waste form embedded in an isotropic medium of quartz sand were measured. A 0.01 M NaH2PO4 buffer solution flowed past the waste form. Downstream concentrations obtained from computer simulations were compared with experimentally measured concentrations of cesium and uranium. Uranium release was found to be controlled by solubility-limited mass transfer, while cesium release was controlled by waste form dissolution kinetics. It was also found that the effects of dissolution on groundwater chemistry must be coupled with solubility-limited mass transfer models to defensibly predict radionuclide release rates under realistic repository conditions.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable