Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-16T16:29:45.813Z Has data issue: false hasContentIssue false

Variable Angle Spectroscopic Ellipsometry (VASE) for the Study of Ion-Beam and Growth-Modified Solids*

Published online by Cambridge University Press:  25 February 2011

John A. Woollam
Affiliation:
Department of Electrical Engineering University of Nebraska Lincoln, NE 68588-0511
Paul G. Snyder
Affiliation:
Department of Electrical Engineering University of Nebraska Lincoln, NE 68588-0511
M. C. Rost
Affiliation:
Department of Electrical Engineering University of Nebraska Lincoln, NE 68588-0511
Get access

Extract

In the most commonly used form of ellipsometry, a monochromatic collimated linearly polarized light beam is directed at an angle φ to the normal of a sample under study. The specularly reflected beam is, in general, elliptically polarized, and the state of polarization is analyzed using a second polarizer and photodetector.1 Figure 1 shows a schematic of the rotating analyzer automated spectroscopic ellipsometer used at the University of Nebraska. The angle of incidence can be set over a wide range of angles, with a precision and repeatability of ±0.01 angular degrees. A computer controls the monochromator, the azimuth of a stepper motor driven polarizer, a shutter, and the digitization of the detector signal. There are several other schemes used for acquiring ellipsometric data, and these are discussed in several sources.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable