Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-17T03:16:50.898Z Has data issue: false hasContentIssue false

Very Thin Micromorph Tandem Solar Cells Deposited at Low Substrate Temperature

Published online by Cambridge University Press:  18 May 2012

M.M. de Jong
Affiliation:
University Utrecht, Debye Institute for Nanomaterials Science, Nanophotonics-Physics of Devices, P.O. Box 80.000, 3508 TA Utrecht, The Netherlands
J.K. Rath*
Affiliation:
University Utrecht, Debye Institute for Nanomaterials Science, Nanophotonics-Physics of Devices, P.O. Box 80.000, 3508 TA Utrecht, The Netherlands
R.E.I. Schropp
Affiliation:
University Utrecht, Debye Institute for Nanomaterials Science, Nanophotonics-Physics of Devices, P.O. Box 80.000, 3508 TA Utrecht, The Netherlands
*
*Correspondence : J.K.Rath@uu.nl
Get access

Abstract

As an alternative to crystalline silicon or thin film solar cells on rigid glass substrates, we aim to fabricate amorphous silicon (a-Si)/nanocrystalline silicon (nc-Si) tandem thin film solar cells on cheap flexible substrates. We have chosen polycarbonate as the superstrate and adapted the a-Si and nc-Si deposition processes for deposition at a maximum temperature of 130°. Because a-Si deposited at low temperatures has a high band gap, we were able to fabricate very thin (<1.2 μm) a-Si/nc-Si solar cells, because the high band gap of the a-Si shifts the current generation more towards the bottom cell, allowing for a much thinner (900 nm) bottom cell. The somewhat lower Jsc of the complete cell is partly compensated by a higher Vocwhich results in an initial conversion efficiency of 9.5% for the low temperature tandem solar cells on glass.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable