Hostname: page-component-7b7567c8c-48dgx Total loading time: 0 Render date: 2026-11-18T06:08:13.883Z Has data issue: false hasContentIssue false

Wafer Level Micropackaging of MEMS Devices Using Thin Film Anodic Bonding

Published online by Cambridge University Press:  01 February 2011

Lauren E. S. Rohwer
Affiliation:
Sandia National Laboratories Albuquerque, NM 87185, U.S.A.
Andrew D. Oliver
Affiliation:
Sandia National Laboratories Albuquerque, NM 87185, U.S.A.
Melissa V. Collins
Affiliation:
Sandia National Laboratories Albuquerque, NM 87185, U.S.A.
Get access

Abstract

A wafer level packaging technique that involves anodic bonding of Pyrex wafers to released surface micromachined wafers is demonstrated. Besides providing a hermetic seal, this technique allows full wafer release, provides protection during die separation, and offers the possibility of integration with optoelectronic devices. Anodic bonding was performed under applied voltages up to 1000 V, and temperatures ranging from 280 to 400°C under vacuum (10-4Torr). The quality of the bonded interfaces was evaluated using shear strength testing and leak testing. The shear strength of Pyrex-to-polysilicon and aluminum bonds was ∼10-15 MPa. The functionality of surface micromachined polysilicon devices was tested before and after anodic bonding. 100% of thermal actuators, 94% of torsional ratcheting actuators, and 70% of microengines functioned after bonding. The 70% yield was calculated from a test sample of 25 devices.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable