Hostname: page-component-7b7567c8c-jswmv Total loading time: 0 Render date: 2026-11-15T20:41:10.584Z Has data issue: false hasContentIssue false
  • English
  • Français

Z-Axis Anisotropic Electrically Conducting Polymer-Matrix Composite Film

Published online by Cambridge University Press:  15 February 2011

Lin Li and
D. D. L. Chung
Lin Li
Affiliation:
Composite Materials Research Laboratory, State University of New York at Buffalo, Buffalo, NY 14260-4400
D. D. L. Chung
Affiliation:
Composite Materials Research Laboratory, State University of New York at Buffalo, Buffalo, NY 14260-4400
Get access

Abstract

A z-axis anisotropic electrically conducting polymer-matrix composite film was developed. It comprised 25 vol.% copper coated polyether sulfone particles and a polyimidesiloxane matrix. Each particle protruded from both sides of the film and provided a conducting path along the z-axis. A z-axis pressure of 40 kPa resulted in a z-axis electrical resistivity of 2 ohm.cm for the overall film (i.e., 5 × 10-2 ohm.cm for a conducting path); subsequent pressure removal caused the resistivity to rise to 7 ohm.cm only. The film exhibited negligible stress relaxation and a low modulus of 1.67 GPa.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 323: Symposium J – Electronic Packaging Materials Science VII , 1993, 21
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1. Iscoff, Rom, Semiconductor International, May 1990.Google Scholar
2. Advanced IC packaging, Electronic Trend Publications, 1990, p. 2.Google Scholar
3. Trummala, R. and Rymarszewski, E., “Controlled Collapse Chip Connection”, Micro-Electronics Packing Handbook, Van Nostrand Reinhold, Ed, 1989, p. 366.Google Scholar
4. Fulton, J.A., Horton, D.R., Moore, R.C., Lambert, W.R. and Mottine, J.J., Proc. 33th Electronic Components Conf., May 1989, p. 71.Google Scholar
5. Peter Hogerton, B., Hall, J.B., Pujol, J.M. and Reylek, R.S., Mat. Res. Soc. Symp. Proc., Vol.154, 1989, p. 415.CrossRefGoogle Scholar
6. Tead, Stanley F., DARPA Physical Electronic Packaging 1992 Program Review, Arlington, VA, Feb. 4, 1992.Google Scholar
7. Chung, Kevin, Dreier, Garret, Fitzgerald, Patricia, Boyle, Andrew, Lin, Martin and Sager, Jeffrey, Proc. 41st Electronic Components Conf., May 1991, p. 345.Google Scholar