From the 40s A.D. onwards a dense military system was established in the Lower Rhine delta in the Netherlands. Long since, it is questioned why this system was established in a wetland area and even turned into the northwest frontier of the Roman Empire, the Limes. A new detailed palaeogeographical map, based on a digital elevation model (LIDAR), soil maps and excavation results, was constructed. This reconstruction provides insight and understanding of the interactions between the natural environment in this part of the delta on the one hand and the establishment of this part of the Limes along the Old Rhine between Utrecht and Katwijk on the other. This study shows that the distinctive landscape of the western Rhine-Meuse delta, with an exceptionally large number of tributaries, determined the spatial pattern of the military structures. All forts (castella) were erected on the southern natural levees of the river Rhine, directly alongside the river, regardless of height and composition of the subsoil and alongside or opposite routes that provided natural access to the river. We conclude that their aim was to guard all waterways that gave access to the river Rhine from the Germanic residential areas further north and from/to the Meuse tributary further south in the delta. In addition, a system of small military structures, mostly watchtowers, was erected between the forts to watch over the river Rhine and its river traffic. Furthermore, at least two canals were established to create shorter and safely navigable transport routes to the river Meuse. At first, this integrated system of castella and watchtowers probably aimed to protect against Germanic invasions and to create a safe corridor for transport and built up of army supplies for the British invasion in 43 A.D. Only later on, probably by the end of the first century, this corridor turned into a frontier zone.

This study presents an annually resolved dendrochronological reconstruction of hydrological impacts on the Roman and early-medieval landscape in the Low Countries of northwestern Europe. Around 600 hydrologically sensitive ring-width patterns, mostly oak (Quercus robur/petraea) as well as some ash (Fraxinus excelsior) and elm (Ulmus sp.), were selected from an initial dataset of >5000 and compiled into two chronologies that span the first millennium AD. Their content and (dis)similarities to established tree-ring chronologies from this and surrounding regions were used to assess their provenance, which in both cases is in the area where the majority of the wood was recovered. Instances of high groundwater levels and/or inundation were catalogued by identifying multi-year intervals of strongly reduced annual growth that occurred simultaneously throughout the research area. The resulting record contains 164 events dated between AD 1 and 1000, of which 21 have a recurrence frequency ≥50 years. One-third of the ≥50-yr events date between AD 185 and 282, making this the most flood-intense interval of the first millennium. The severest reconstructed impact of the first millennium dates to AD 602. A comparison to historically documented river floods/sea breaches and drought/heat spells shows that the predominant cause of the inferred impacts in the research area was river overflow. Synchronous inundation responses of oaks preserved in former bogs in Lower Saxony (NW Germany) indicate that half of the reconstructed events occurred on a supra-regional level, pointing to regional precipitation as a main forcing. River floods documented in written sources do not seem to have affected tree growth in Lower Saxony in a significant manner, indicating that the majority of documented floods most likely were caused by hydrological circumstances upstream of the catchments of the Rhine and/or Meuse. Reconstructed flood impacts during the Early Middle Ages coincide remarkably well with construction and repair of Rhine revetments at the early-medieval site of Leiderdorp-Plantage in the western Netherlands.

The aim of this paper is to reconstruct the evolution of the early to middle Holocene Rhine-Meuse river mouths in the western Netherlands and to understand the observed spatial and temporal changes in facies. This is achieved by constructing three delta wide cross-sections using a newly accumulated database with thousands of core descriptions and cone penetration test results, together with a large set of pollen/diatom analyses and OSL/14C-dates. Most of the studied deposits accumulated in the fluvial-to-marine transition zone, a highly complex area due to the interaction of terrestrial and marine processes. Understanding how the facies change within this zone, is necessary to make correct palaeogeographic interpretations.

We find a well preserved early to middle Holocene coastal prism resting on lowstand valley floors. Aggradation started after 9 ka cal BP as a result of rapid sea-level rise. Around 8 ka most parts of the study area were permanently flooded and under tidal influence. After 8 ka a bay-head delta was formed near Delft, meaning that little sand could reach the North Sea. Several subsequent avulsions resulted in a shift from the constantly retreating Rhine river mouth to the north. When after 6.5 ka the most northerly river course was formed (Oude Rijn), the central part of the palaeovalley was quickly transgressed and transformed into a large tidal basin. Shortly before 6 ka retrogradation of the coastline halted and tidal inlets began to close, marking the end of the early-middle Holocene transgression.

This paper describes the transition from a fluvial valley to an estuary in unprecedented detail and enables more precise palaeo-reconstructions, evaluation of relative importance of fluvial and coastal processes in rapid transgressed river mouths, and more accurate sediment-budget calculations. The described and well illustrated (changes in) facies are coupled to lithogenetic units. This will aid detailed palaeogeographic interpretations from sedimentary successions, not only in the Netherlands, but also in other estuarine and deltaic regions.

Geothermal energy is a viable alternative to gas for the heating of buildings, industrial areas and greenhouses, and can thus play an important role in making the transition to sustainable energy in the Netherlands. Heat is currently produced from the Dutch subsurface through circulation of water between two wells in deep (1.5–3 km) geothermal formations with temperature of up to ∼100 °C. As the number of these so-called doublets is expected to increase significantly over the next decades, and targeted depths and temperatures increase, it is important to assess potential show-stoppers related to geothermal operations. One of these potential hazards is the possibility of the occurrence of felt seismic events, which could potentially damage infrastructure and housing, and affect public support. Such events have been observed in several geothermal systems in other countries. Here we review the occurrence (or the lack) of felt seismic events in geothermal systems worldwide and identify key factors influencing the occurrence and magnitude of these events. Based on this review, we project the findings for seismicity in geothermal systems to typical geothermal formations and future geothermal developments in the Netherlands. The case study review shows that doublets that circulate fluids through relatively shallow, porous, sedimentary aquifers far from the crystalline basement are unlikely to generate felt seismic events. On the other hand, stimulations or circulations in or near competent, fractured, basement rocks and production and reinjection operations in high-temperature geothermal fields are more prone to induce felt events, occasionally with magnitudes of M > 5.0. Many of these operations are situated in tectonically active areas, and stress and temperature changes may be large. The presence of large, optimally oriented and critically stressed faults increases the potential for induced seismicity. The insights from the case study review suggest that the potential for the occurrence of M > 2.0 seismicity for geothermal operations in several of the sandstone target formations in the Netherlands is low, especially if faults can be avoided. The potential for induced seismicity may be moderate for operations in faulted carbonate rocks. Induced seismicity always remains a complex and site-specific process with large unknowns, and can never be excluded entirely. However, assessing the potential for inducing felt seismic events can be improved by considering the relevant (site-specific) geological and operational key factors discussed in this article.

Pleistocene strata of the Wadden Sea region are mostly covered by an up to 10m thick sediment wedge deposited during the Holocene transgression. However, tidal inlets cut deep into the Holocene succession, causing Middle Pleistocene to early Holocene glacial and interglacial deposits to outcrop at the channel bottom. To investigate how the lithological properties and/or morphologies of these deposits affect the development of Holocene tidal inlets (e.g. limiting erosional processes), we analysed a series of eight cores to verify three high-resolution sub-bottom transects – and thus – to extend point-based data over a broader area. Furthermore, eight additional new cores (16 WASA cores in total), and 14 reinterpreted cores from the LBEG (Geological Survey of Lower Saxony) log database, were correlated to generate three short cross-sections at the transition from the tidal inlet (Riffgat channel) to the island of Norderney, revealing a number of new aspects for the reconstruction of the Pleistocene palaeoenvironments, i.e. the last two glacials (Saalian and Weichselian) and interglacials (Holsteinian? and Eemian). A succession of Middle Pleistocene lacustrine delta deposits, belonging either to the Holsteinian or the Dömnitz temperate stage, suggests the presence of Elsterian tunnel valleys located below the island. Furthermore, we verified the presence of an Eemian mixed tidal-flat system overlain by an Eemian sand tidal flat below the western head of Norderney which is, in contrast to suggestions from previous studies, not fully eroded in this area. Finally, we demonstrate that the Saalian moraine (Drenthe Main Till) functions as a limiting constraint in the vertical development of the Holocene/modern Riffgat channel. Our results provide a better understanding of the Quaternary stratigraphy of the central Wadden Sea as well as the influence of the subsurface geology on the architecture and evolution of tidal channels.

Based on recent vegetation distribution and an integration of macropalaeobotanical and palynological information, a palaeocommunity model is explored that may permit detailed interpretations of quantitative sporomorph distribution patterns in the Jurassic and Early Cretaceous of NW-Europe in terms of changes in palaeoenvironment (sea-level, climate). The conceptual model is based on the recognition of Sporomorph Ecogroups (SEGs) that reflect broad co-existing plant communities, viz. upland, lowland, river, pioneer, coastal, and tidally-influenced SEGs. In successive palynological assemblages, shifts in the relative abundance of SEGs are thought to be indicators of sea-level changes. Climatic changes may be recognised through significant shifts within the quantitative composition of individual SEGs.

Sequence stratigraphic correlations indicate that intermittent changes of the kinematic far-field stress-field regimes, and the associated geodynamic re-organisations at the plate-tectonic contacts of the African, Apulian, Iberian and European plates, affected the Tertiary palaeogeographic evolution of the West European Platform through a combination of intra-plate tectonics and fluctuations of relative sea level. A temporal sequence of first-order stages in structural, palaeotopographic and palaeohydrographic development of the platform can be distinguished from the Paleocene onwards. These formative stages are closely linked to major plate-boundary events involving the development of the Pyrenean and Alpine orogens, and can be traced throughout the West European Platform.

In northwest Europe the pattern of earthquake distribution is correlated with known Quaternary faults. Excavation of fault scarps revealed that these fault zones have been active during the Late Pleistocene. In this paper we present the results of an exploratory trenching study across the Geleen Fault, part of the Feldbiss Fault Zone, the Netherlands. Middle Saalian fluvial deposits of the Meuse, overlain by local slope deposits, were excavated. The Geleen Fault has displaced the fluvial deposits by at least 5 meters. The upper layers of local slope deposits could be correlated across the fault and were all dated at approximately 15 ka B.P. This gives the opportunity to reconstruct the sequence of events that occurred about 15 ka ago. Liquefactions provide evidence for an earthquake event. However, the main offset along the Geleen Fault is not stratigraphically related to the liquefactions. The liquefactions and the fault offset are stratigraphically separated by a period of erosion. We therefore propose a sequence of events starting with an earthquake accompanied by liquefaction, followed by a period of postseismic displacement with high rates compared to the long-term average. After this period normal displacement rates occurred, comparable to the long-term average. The duration of the period of high displacement rates could not be determined.

The up to 60 m thick Neurath Sand (Serravallian, late middle Miocene) is one of several marine sands in the Lower Rhine Basin which were deposited as a result of North Sea transgressive activity in Cenozoic times. The shallow-marine Neurath Sand is well exposed in the Garzweiler open-cast mine, which is located in the centre of the Lower Rhine Basin. Detailed examination of three sediment profiles extending from the underlying Frimmersdorf Seam via the Neurath Sand and through to the overlying Garzweiler Seam, integrating both sedimentological and palaeontological data, has enabled the depositional setting of the area to be reconstructed.

Six subenvironments are recognised in the Neurath Sand, commencing with the upper shoreface (1) sediments characterised by glauconite-rich sands and an extensive biota (Ophiomorpha ichnosp.). These are associated with the silt-rich sands of a transitional subenvironment (2), containing Skolithos linearis, Planolites ichnosp. and Teichichnus ichnosp. These silt-rich sands grade up to the upper shoreface subenvironment (1), which is indicative of an initial regressive trend. The overlying intertidal deposits can be subdivided into a lower breaker zone (3), characterised by ridge-and-runnel systems, and the swash zone (4) where the surge and backwash of waves resulted in the deposition of high-energy laminites. The intertidal deposits were capped by aeolian backshore sediments (5). Extensive root traces present in this latter subenvironment reflect the development of the overlying peatland (i.e. Garzweiler Seam). Within the Garzweiler Seam, restricted sand lenses indicate a lagoonal or estuarine depositional environment (6). Regional correlation with adjacent wells establishes that shallow-marine conditions were widespread across the Lower Rhine Basin in middle Serravallian times. The shoreline profile, characterised by both tidal and wave activity and influenced by fluvial input from the adjacent Rhenish Massif, is indicative of the complexity of the coastal depositional setting within the Lower Rhine Basin.

This article investigates the origin of a rare occurrence of kyanite quartzites in the Palaeoproterozoic greenstone belt of Suriname. The rocks form elongated hills in the Bosland area, Brokopondo district, where they are associated with meta-sedimentary, meta-volcanic and granitic lithologies. Their mineral content and unusual Si- and Al-rich chemical composition are inferred to be the result of advanced argillic alteration of felsic volcanic tuffs and a later overprint by regional metamorphism up to lower amphibolite facies during the Trans-Amazonian orogeny. Structurally, the Bosland area seems centred within a contractional strike-slip duplex of a major dextral fault system. The alteration was probably associated with a high-sulphidation environment and involved significant to almost complete removal of alkali and alkaline earth elements. Pseudosection modelling and textures suggest that the precipitation–temperature (P–T) history of the kyanite quartzites started with shallow (<2kbar) hydrothermal alteration of the acidic tuffaceous volcanics, possibly in the andalusite stability field (T>350°C), and ended in peak metamorphic conditions in the kyanite–staurolite stability field (P>4kbar and T=500–650°C). Alteration events that preceded the peak of Trans-Amazonian metamorphism may be more common in the rock record of Suriname's greenstone belt, which lends support to the hypothesis that gold mineralisations in the region can be pre-orogenic.