Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-16T15:48:25.605Z Has data issue: false hasContentIssue false

In situ time-resolved X-ray diffraction of tobermorite formation process under hydrothermal condition: Influence of reactive al compound

Published online by Cambridge University Press:  05 March 2012

K. Matsui*
Affiliation:
Asahi-KASEI Construction Materials Corporation, Ibaraki, Japan
A. Ogawa
Affiliation:
Asahi-KASEI Construction Materials Corporation, Ibaraki, Japan
J. Kikuma
Affiliation:
Analysis and Simulation Center, Asahi-KASEI Corporation, Shizuoka, Japan
M. Tsunashima
Affiliation:
Analysis and Simulation Center, Asahi-KASEI Corporation, Shizuoka, Japan
T. Ishikawa
Affiliation:
Analysis and Simulation Center, Asahi-KASEI Corporation, Shizuoka, Japan
S. Matsuno
Affiliation:
Analysis and Simulation Center, Asahi-KASEI Corporation, Shizuoka, Japan
*
a)Author to whom correspondence should be addressed. Electronic mail: matsui.kj@om.asahi-kasei.co.jp
Get access

Abstract

Hydrothermal formation reaction of tobermorite in the autoclaved aerated concrete (AAC) process has been investigated by in situ X-ray diffraction. High-energy X-rays from a synchrotron radiation source in combination with a newly developed autoclave cell and a photon-counting pixel array detector were used. XRD measurements were conducted in a temperature range 100–190°C throughout 12 h of reaction time with a time interval of 4.25 min under a saturated steam pressure. To clarify the tobermorite formation mechanism in the AAC process, the effect of Al addition on the tobermorite formation reaction was studied. As intermediate phases, non-crystalline calcium silicate hydrate (C-S-H), hydroxylellestadite (HE), and katoite (KA) were clearly observed. Consequently, it was confirmed that there were two reaction pathways via C-S-H and KA in the tobermorite formation reaction of Al containing system. In addition, detailed information on the structural changes during the hydrothermal reaction was obtained.

Information

Type
Technical Articles
Copyright
Copyright © Cambridge University Press 2011

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable