Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-16T23:09:02.795Z Has data issue: false hasContentIssue false

An XRPD Investigation of a Face-Centered Cubic Metallic Plating

Published online by Cambridge University Press:  10 January 2013

Clay Olaf Ruud
Affiliation:
Materials Research Laboratory, The Pennsylvania State University, University Park, PA 16802
Robin J. McDowell
Affiliation:
Materials Research Laboratory, The Pennsylvania State University, University Park, PA 16802
Daniel J. Snoha
Affiliation:
Materials Research Laboratory, The Pennsylvania State University, University Park, PA 16802
Get access

Abstract

Internal elastic strain (i.e., residual stress) and the diffracted X-ray intensity variation over several orientations of crystallites with respect to the specimen surface were investigated as a means of differentiating two qualities of polycrystalline nickel plating. A unique instrument based upon a position-sensitive scintillation X-ray detector was used to apply all of the techniques commonly applied to X-ray stress analysis in this investigation. It was concluded that residual stress measurements did not provide a clear distinction between the two specimens, but comparison of the relative intensities diffracted from crystallographic planes at certain orientations with the surface did provide a distinction.

Information

Type
Research Article
Copyright
Copyright © Cambridge University Press 1986

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable