Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-15T10:59:25.964Z Has data issue: false hasContentIssue false

Determination of equilibrium transformation temperatures Ae3 and Ae1 for low-carbon steels using the in situ high-temperature X-ray diffraction technique

Published online by Cambridge University Press:  29 February 2012

F. Equihua*
Affiliation:
Centro de Investigación y de Estudios Avanzados del Instituto Politécnico Nacional Unidad Saltillo, Carretera Saltillo-Monterrey Km. 13, Molinos del Rey, P.O. Box 663, Saltillo, Coahuila 25900, Mexico
A. Salinas
Affiliation:
Centro de Investigación y de Estudios Avanzados del Instituto Politécnico Nacional Unidad Saltillo, Carretera Saltillo-Monterrey Km. 13, Molinos del Rey, P.O. Box 663, Saltillo, Coahuila 25900, Mexico
*
a)Author to whom correspondence should be address. Electronic mail: fabianequihua@gmail.com
Get access

Abstract

This paper describes a method to determine the equilibrium transformation temperatures in low C steels using the in situ high-temperature X-ray diffraction technique. The samples were heated and then cooled from 1000 to 720 °C in a stepwise manner decreasing to −10 °C. Austenite and ferrite fractions were determined by a quantitative method using the integrated intensities of austenite (111)γ and ferrite (110)α peaks from X-ray diffraction patterns. The effect of the temperature on interplanar d spacings of (111) and (110) crystallographic planes was determined using 2θ maximum positions of the austenite (111)γ and ferrite (110)α peaks. The equilibrium transformation temperatures were determined to be Ae1=720 °C and Ae3=950 °C. The results are in excellent agreement with those obtained by dilatometric analysis and Thermo-Calc phase diagram simulation software. In addition, the results were supported by microstructural observations: the formation of thin ferrite films (5–10 μm) was observed at temperatures near to experimental Ae3.

Information

Type
Technical Articles
Copyright
Copyright © Cambridge University Press 2010

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable