Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T23:48:41.568Z Has data issue: false hasContentIssue false

Least-squares refinement of biaxial stress components and unit-cell parameter in a 〈111〉 textured cubic TiN polycrystalline thin film by X-ray diffraction

Published online by Cambridge University Press:  29 February 2012

Ryouichi Yokoyama*
Affiliation:
Rigaku Corporation, 3-9-12 Akishima, Tokyo 196-8666, Japan
Jimpei Harada
Affiliation:
Rigaku Corporation, 3-9-12 Akishima, Tokyo 196-8666, Japan
Yoshiaki Akiniwa
Affiliation:
Department of Mechanical Engineering and Materials Science, Yokohama National University, 79-1 Tokiwadai, Hodogaya-ku, Yokohama 240-8501, Japan
*
a)Author to whom correspondence should be addressed. Electronic mail: yoko@rigaku.co.jp
Get access

Abstract

Biaxial residual stress in a 〈111〉 textured cubic TiN polycrystalline thin film was analyzed by linear least-squares refinement using the method proposed by Yokoyama and Harada [J. Appl. Crystallogr. 42, 185–191 (2009)]. Values of the unstressed (or stress-free) unit-cell parameter a0=4.2332±0.0006 Å and the stress components of σ11=397(88), σ22=401(88), and σ12=−110(100) were obtained. The values of the in-plane stresses σ11 and σ22 presented in the TiN film are practically the same, while σ12 is relatively small. The results obtained in this study confirm that the above theoretical prediction by Yokoyama and Harada can be used to obtain reliable values of stress-free unit-cell parameter and three biaxial stress components of a textured cubic thin film.

Information

Type
Technical Articles
Copyright
Copyright © Cambridge University Press 2010

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable