Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-16T16:26:48.254Z Has data issue: false hasContentIssue false

Residual stresses in a SiC whisker-reinforced alumina composite by high-temperature X-ray diffraction

Published online by Cambridge University Press:  10 January 2013

Benjamin L. Ballard
Affiliation:
University of Denver, Engineering Department, Denver, Colorado 80210
Paul K. Predecki
Affiliation:
University of Denver, Engineering Department, Denver, Colorado 80210
Camden R. Hubbard
Affiliation:
HTML, Oak National Laboratory, Oak Ridge, Tennessee 37831
Get access

Abstract

Residual strains and microstresses are evaluated for both phase of a hot-pressed, fine-grained α-alumina reinforced with 25 wt% (29 vol%) single-crystal silicon carbide whiskers at temperatures from 25 to 1000 °C. The sample was maintained in a nonoxidizing environment while measurements of the interplaner spacing of alumina (146) and SiC (511 + 333) were made using X-ray diffraction methods. The residual strains were profiled at temperature increments of 250 °C from which the corresponding microstresses were calculated. Linear extrapolation of the SiC ε33 profile indicates that the strains are completely relaxed at a temperature of approximately 1470 °C. These residual stress relaxation results suggest that elevated temperature toughness and fracture strength of this composite may result from cooperative mechanisms.

Information

Type
Research Article
Copyright
Copyright © Cambridge University Press 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable