Hostname: page-component-74656f9884-j7cmm Total loading time: 0 Render date: 2026-11-09T03:49:16.683Z Has data issue: false hasContentIssue false
  • English
  • Français

A Study of Grazing Incidence Configurations and Their Effect on X-Ray Diffraction Data

Published online by Cambridge University Press:  10 January 2013

Raymond P. Goehner  and
Michael O. Eatough
Raymond P. Goehner
Affiliation:
Chemical Instrumentation Research Division 1821, Sandia National Laboratories, Albuquerque, New Mexico 87185, U.S.A.
Michael O. Eatough
Affiliation:
Chemical Instrumentation Research Division 1821, Sandia National Laboratories, Albuquerque, New Mexico 87185, U.S.A.
Get access

Abstract

In recent years, grazing incidence angle attachments have been shown to be very useful in the phase identification of thin polycrystalline films. These devices are sold commercially as attachments to standard powder diffractometers. The attachment normally consists of a long soller slit assembly and a flat crystal monochromator. The soller slit with or without the monochromator is mounted on the diffracted beam side. In this paper we discuss the effects of different configurations from collimator to monochromator on diffraction data. An understanding of these effects is essential in order to obtain more reliable information on phase transformations, crystallite size, microstrain, and residual stress studies.

Information

Type
Research Article
Information
Powder Diffraction , Volume 7 , Issue 1 , March 1992 , pp. 2 - 5
Copyright
Copyright © Cambridge University Press 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

Bertin, E. (1970). Principles and Practices of X-Ray Spectrometric Analysis, Plenum Press, 114–117, 361–364.Google Scholar
Goehner, R. P. & Nichols, M. C. (1986). X-Ray Powder Diffraction, Metals Handbook Ninth Edition, Vol. 10 Materials Characterization, American Society for Metals, 337.Google Scholar
Huang, T. C. (1990). Surface and Ultra-Thin Characterization by Grazing Incident Asymmetric Bragg Diffraction, Adv. X-ray Anal. 33, 91–99.Google Scholar
SAE (1971). Residual Stress Measurements by X-Ray Diffraction – SAE J784a, Society of Automobile Engineers, Inc, Two Pennsylvania Plaza, NY, NY 10001, 24–25.Google Scholar
Siemens, (1988a). Grazing Incidence Attachment Instructions, Number C79000-M3476-C136-02.Google Scholar
Siemens, (1988b). Profile Fitting, Section 37, Siemens DIFFRAC 5000 Software Manual, Siemens Analytical X-Ray Instruments, Inc., Madison, WI.Google Scholar
Takayama, T. & Matsumoto, Y. (1990). Effects of Refraction and Reflection on Analysis of Thin Films by the Grazing-incidence X-Ray Diffraction Method, Adv. X-Ray Anal. 33, 109–120.Google Scholar
Toney, M. F., Huang, T. C., Brennan, S. & Zophia, R. (1988) X-Ray Depth Profiling of Iron Oxide Thin Films, J. of Mat. Res., 3 (2), 351–356.Google Scholar