Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-16T03:40:44.786Z Has data issue: false hasContentIssue false

Use of Compton scattering measurements for attenuation corrections in Rietveld phase analysis with an external standard

Published online by Cambridge University Press:  10 January 2013

S. Pratapa
Affiliation:
Materials Research Group, Department of Applied Physics, Curtin University of Technology, GPO Box U1987, Perth, WA, Australia 6845
B. H. O’Connor*
Affiliation:
Materials Research Group, Department of Applied Physics, Curtin University of Technology, GPO Box U1987, Perth, WA, Australia 6845
I-M. Low
Affiliation:
Materials Research Group, Department of Applied Physics, Curtin University of Technology, GPO Box U1987, Perth, WA, Australia 6845
*
b)To whom correspondence should be addressed.
Get access

Abstract

Mass attenuation coefficient corrections, for Rietveld phase analysis with an external compositional calibration standard, may be made using Compton scattering intensities measured by X-ray fluorescence spectrometry. The method is mainly useful for Rietveld phase analysis when mixing an internal standard is impossible or undesirable. The validity of the method has been demonstrated using a suite of alumina-zirconia powders of known composition. Also presented are results for a typical application—determination of phase composition depth profiles defining the graded compositional character of an aluminium titanate/zirconia-alumina ceramic composite.

Information

Type
Research Article
Copyright
Copyright © Cambridge University Press 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable