Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-16T07:56:46.652Z Has data issue: false hasContentIssue false

CHALLENGES FACED BY DESIGN ENGINEERS WHEN CONSIDERING MANUFACTURING IN DESIGN – AN INTERVIEW STUDY

Published online by Cambridge University Press:  11 June 2020

M. Doellken*
Affiliation:
Karlsruhe Institute of Technology, Germany
C. Zimmerer
Affiliation:
Karlsruhe Institute of Technology, Germany
S. Matthiesen
Affiliation:
Karlsruhe Institute of Technology, Germany

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

The consideration of manufacturing in design is still a challenge for design engineers. This paper presents the results of an interview study, conducted with 15 participants. 4 challenges are identified in this study: Manufacturing-specific knowledge is mostly not sufficient. The design of manufacturing-oriented concepts in terms of costs is difficult. The feasibility of manufacturing is not assessed. The dimension of cost drivers is unknown, hindering optimisation in early stages of design. Based on these results the need for further research emerges regarding the impact of these challenges.

Information

Type
Article
Creative Commons
Creative Common License - CCCreative Common License - BYCreative Common License - NCCreative Common License - ND
This is an Open Access article, distributed under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives licence (http://creativecommons.org/licenses/by-nc-nd/4.0/), which permits non-commercial re-use, distribution, and reproduction in any medium, provided the original work is unaltered and is properly cited. The written permission of Cambridge University Press must be obtained for commercial re-use or in order to create a derivative work.
Copyright
The Author(s), 2020. Published by Cambridge University Press