Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-17T19:01:13.655Z Has data issue: false hasContentIssue false

SUPPORTING ADDITIVE MANUFACTURING TECHNOLOGY DEVELOPMENT THROUGH CONSTRAINT MODELLING IN EARLY CONCEPTUAL DESIGN: A SATELLITE PROPULSION CASE STUDY

Published online by Cambridge University Press:  11 June 2020

O. Borgue*
Affiliation:
Chalmers University of Technology, Sweden
F. Valjak
Affiliation:
University of Zagreb, Croatia
M. Panarotto
Affiliation:
Chalmers University of Technology, Sweden
O. Isaksson
Affiliation:
Chalmers University of Technology, Sweden

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

Function and constraints modelling are implemented to design two gridded ion thrusters for additive manufacturing (AM). One concept takes advantage of AM design freedom, disregarding AM limitations and is not feasible. The other concept considers AM limitations and is manufacturable and feasible. Constraints modelling highlights AM capabilities that can be improved, showing where future investment is needed. Constraints representation can also support the creation of technology development roadmaps able to identify areas of AM technologies that must be improved.

Information

Type
Article
Creative Commons
Creative Common License - CCCreative Common License - BYCreative Common License - NCCreative Common License - ND
This is an Open Access article, distributed under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives licence (http://creativecommons.org/licenses/by-nc-nd/4.0/), which permits non-commercial re-use, distribution, and reproduction in any medium, provided the original work is unaltered and is properly cited. The written permission of Cambridge University Press must be obtained for commercial re-use or in order to create a derivative work.
Copyright
The Author(s), 2020. Published by Cambridge University Press