Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T06:35:42.690Z Has data issue: false hasContentIssue false

USING KINEMATIC ANALYSIS TO DEVELOP A NEW TOOTH SYSTEM FOR GEARINGS WITH VARIABLE SHAFT ANGLE

Published online by Cambridge University Press:  11 June 2020

M. Grafinger*
Affiliation:
TU Wien, Austria

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

The belt units of an omnidirectional treadmill need to be connected for a continuous rotational transmission with variating axes angle. Torus gearing is not appropriate due to kinematic reasons, therefore a crown gearing with cone-shaped teeth is proposed. Parameter analysis on a virtual kinematics model show that depending on the cone angle, overlaps occur at different axis angles. Consequently, the shape of the teeth is modified with tip and foot relief and optimized so that no overlapping of the teeth occurs while a large path of contact is provided.

Information

Type
Article
Creative Commons
Creative Common License - CCCreative Common License - BYCreative Common License - NCCreative Common License - ND
This is an Open Access article, distributed under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives licence (http://creativecommons.org/licenses/by-nc-nd/4.0/), which permits non-commercial re-use, distribution, and reproduction in any medium, provided the original work is unaltered and is properly cited. The written permission of Cambridge University Press must be obtained for commercial re-use or in order to create a derivative work.
Copyright
The Author(s), 2020. Published by Cambridge University Press