Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T04:00:29.008Z Has data issue: false hasContentIssue false

Analysing shrinkage compensation in additive manufacturing: a comparative study of reverse engineering and gauge-based methods

Published online by Cambridge University Press:  16 May 2024

Alessio Zanini*
Affiliation:
Università degli Studi della Tuscia, Italy
Marco Marconi
Affiliation:
Università degli Studi della Tuscia, Italy
Gianluca Rubino
Affiliation:
Università degli Studi della Tuscia, Italy

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

Additive Manufacturing has transformed modern manufacturing with its well-known advantages. However, shrinkage remains a critical challenge, causing dimensional inaccuracies that should be properly compensated to assure geometric fidelity. This study aims to assess the reliability of a Reverse Engineering (RE) technique for dimensional compensation. A gauge-based measurement approach has been used to validate the RE method. Results confirm that the RE method is promising, while highlighting the intrinsic errors of the RE technique, and suggesting ways to evaluate and prevent them.

Information

Type
Design for Additive Manufacturing
Creative Commons
Creative Common License - CCCreative Common License - BYCreative Common License - NCCreative Common License - ND
This is an Open Access article, distributed under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives licence (http://creativecommons.org/licenses/by-nc-nd/4.0/), which permits non-commercial re-use, distribution, and reproduction in any medium, provided the original work is unaltered and is properly cited. The written permission of Cambridge University Press must be obtained for commercial re-use or in order to create a derivative work.
Copyright
The Author(s), 2024.