Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T09:55:40.394Z Has data issue: false hasContentIssue false

Function Integration through Design for Hybrid Integrating Additive Manufacturing Technologies

Published online by Cambridge University Press:  26 May 2022

K.-E. W. H. Steffan*
Affiliation:
Technical University of Darmstadt, Germany
M. Fett
Affiliation:
Technical University of Darmstadt, Germany
E. Kirchner
Affiliation:
Technical University of Darmstadt, Germany

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

Additive manufacturing (AM) technologies enable the design of new products due to their potentials. The potential of function integration can be extended through a combination of AM with a component integrating technology forming a hybrid integrating additive manufacturing technology (hiAM). With a created development method optimization areas within a product are identified on a functional level using characteristics, structural configurations and integrated functional areas. These are derived analysing examples in literature. The method is applied to a mechanical arm and hand prosthesis.

Information

Type
Article
Creative Commons
Creative Common License - CCCreative Common License - BYCreative Common License - NCCreative Common License - ND
This is an Open Access article, distributed under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives licence (http://creativecommons.org/licenses/by-nc-nd/4.0/), which permits non-commercial re-use, distribution, and reproduction in any medium, provided the original work is unaltered and is properly cited. The written permission of Cambridge University Press must be obtained for commercial re-use or in order to create a derivative work.
Copyright
The Author(s), 2022.