Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-17T10:00:12.851Z Has data issue: false hasContentIssue false

Minimizing occupant loads in vehicle crashes through reinforcement learning-based restraint system design: assessing performance and transferability

Published online by Cambridge University Press:  16 May 2024

Janis Mathieu*
Affiliation:
Porsche Engineering Group GmbH, GermanySaarland University, Germany
Parul Gupta
Affiliation:
Ilmenau University of Technology, Germany
Michael Di Roberto
Affiliation:
Porsche Engineering Group GmbH, Germany
Michael Vielhaber
Affiliation:
Saarland University, Germany

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

The optimization of mechanical behavior in safety systems during crash scenarios consistently poses challenges in vehicle development. Hence, a reinforcement learning-based approach for optimizing restraint systems in frontal impacts is proposed. The trained agent, which adjusts five parameters simultaneously, is capable of minimizing loads on a seen and unseen anthropomorphic test device on the co-driver position and is thus able of transferring knowledge. A hundred times higher rate of convergence to reach a similar optimum compared to a global optimization algorithm has been achieved.

Information

Type
Artificial Intelligence and Data-Driven Design
Creative Commons
Creative Common License - CCCreative Common License - BYCreative Common License - NCCreative Common License - ND
This is an Open Access article, distributed under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives licence (http://creativecommons.org/licenses/by-nc-nd/4.0/), which permits non-commercial re-use, distribution, and reproduction in any medium, provided the original work is unaltered and is properly cited. The written permission of Cambridge University Press must be obtained for commercial re-use or in order to create a derivative work.
Copyright
The Author(s), 2024.