Hostname: page-component-7b7567c8c-48dgx Total loading time: 0 Render date: 2026-11-18T02:48:57.047Z Has data issue: false hasContentIssue false

Rethinking System Boundaries for Better Utilisation of Additive Manufacturing Potentials – A Case Study

Published online by Cambridge University Press:  26 May 2022

P. F. Schmitt*
Affiliation:
University of Rostock, Germany
L. Schnödewind
Affiliation:
University of Rostock, Germany
K. Gericke
Affiliation:
University of Rostock, Germany

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

The potentials of additive manufacturing for objectives such as lightweight construction are not yet fully exploited. In this paper, the possibilities of integrative function and system modelling for this challenge will be discussed. In a design study, a triathlon trailer is designed considering the constraints of AM. A suitable system boundary is to be detected using the one-part device method. The findings of the study will help to understand in which form methods such as functional modelling can be applied or adapted for the application of additive manufacturing.

Information

Type
Article
Creative Commons
Creative Common License - CCCreative Common License - BYCreative Common License - NCCreative Common License - ND
This is an Open Access article, distributed under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives licence (http://creativecommons.org/licenses/by-nc-nd/4.0/), which permits non-commercial re-use, distribution, and reproduction in any medium, provided the original work is unaltered and is properly cited. The written permission of Cambridge University Press must be obtained for commercial re-use or in order to create a derivative work.
Copyright
The Author(s), 2022.