Hostname: page-component-7b7567c8c-tnzcf Total loading time: 0 Render date: 2026-11-14T09:55:45.025Z Has data issue: false hasContentIssue false
  • English
  • Français

Development Methodology for Optomechatronic Systems Using the Example of a High-Resolution Projection Module

Part of:Knowledge-based Engineering

Published online by Cambridge University Press:  26 July 2019

Peer-Phillip Ley,
Marvin Knöchelmann,
Gerolf Kloppenburg and
Roland Lachmayer

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

In the last few years there has been a noticeable change in the development of headlamp systems in the field of vehicle lighting technology. Starting with adaptive front-lighting systems via Matrix LED systems, high-resolution headlamps will provide more safety in road traffic in the near future.

For the implementation of high-resolution headlamps various spatial light modulators and light generating technologies can be applied. The emitted light of the light source is directed via an illumination optics onto the modulator and a projection optics is applied to image the spatial light modulator into the traffic area. The formerly mechatronic systems are thus increasingly become opto- mechatronic systems. Therefore, the optic design must be taken into account in the early development phase of these systems.

In this paper we present a methodical approach to describe the optic design for optomechatronic systems. This approach can be used to develop efficient and high-intensity optomechatronic systems using various spatial light modulators and light generating technologies. Conclusively we demonstrate an exemplary application of the methodology on a high-resolution projection module.

Keywords

OptimisationMechatronicsProduct modelling / models

Information

Type
Article
Information
Proceedings of the Design Society: International Conference on Engineering Design , Volume 1 , Issue 1 , July 2019, pp. 2547 - 2556
Creative Commons
Creative Common License - CCCreative Common License - BYCreative Common License - NCCreative Common License - ND
This is an Open Access article, distributed under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives licence (http://creativecommons.org/licenses/by-nc-nd/4.0/), which permits non-commercial re-use, distribution, and reproduction in any medium, provided the original work is unaltered and is properly cited. The written permission of Cambridge University Press must be obtained for commercial re-use or in order to create a derivative work.
Copyright
© The Author(s) 2019

References

VDI 2206 (2004). VDI-Richtlinie 2206 Design methodology for mechatronic systems. Berlin : Beuth Verlag.Google Scholar
Knöchelmann, M.; Kloppenburg, G.; Mozgova, I.; Lachmayer, R. (2019). Methodische Entwicklung eines opto-mechatronischen Systems am Beispiel eines hochadaptiven Fahrzeugscheinwerfers. in VDI Berichte, Mechatronik 2019, Paderborn, 27-28 March, ISBN 978-3-945437-05-6.Google Scholar
ECE 123. (2010), Regelung Nr. 123 der Wirtschaftskommission für Europa der Vereinten Nationen (UN/ECE) — Einheitliche Bedingungen für die Genehmigung von adaptiven Frontbeleuchtungssystemen (AFS) für KraftfahrzeugeGoogle Scholar
Lachmayer, R. (2016). Beleuchtung. in Vieweg-Handbuch Kraftfahrzeugtechnik, Springer Vieweg, Wiesbaden, pp 890–906.Google Scholar
Kloppenburg, G.; Wolf, A.; Lachmayer, R. (2016). High-resolution vehicle headlamps: technologies and scanning prototype. in Advanced Optical Technologies, Vol. 5 No. 2, pp 147–155. https://doi.org/10.1515/aot-2016-0001Google Scholar
Pfullmann, N.; Thiel, A.; Thamm, M.; Plöger, R.; Kloppenburg, G.; Wolf, A.; Lachmayer, R. (2017). From mechanical ADB systems to high resolution headlamps – new opportunities of novel headlight systems. in ISAL 2017 Proceedings, 12th International Symposium on Automotive Lighting, Darmstadt, 25-27 September.Google Scholar
Ley, P.-P.; Lachmayer, R. (2019). Imaging and non-imaging illumination of DLP for high resolution headlamps. in Proceedings of SPIE 10932, SPIE Photonics West, San Fransisco, February 1st - 7th, https://doi.org/10.1117/12.2507436Google Scholar
Kusch, A.; Wurz, M.; Held, M. P.; Wolf, A.; Lachmayer, R. (2017). LED packaging with optimized heat dissipation for a micro LED array. in International Conference and Exhibition on the integration of materials, devices and systems., Smart Systems Integration, Ireland, 8–9 March.Google Scholar
Wolf, A., Kloppenburg, G., Danov, R., Lachmayer, R. (2016). DMD Based Automotive Lighting Unit. in DGaO Proceedings, Deutsche Gesallschaft für angewandte Optik, Hannover, 17–21 May, https://doi.org/10.15488/4004Google Scholar
Wolf, A., Kloppenburg, G., Lachmayer, R. (2017). Lighting Device, Lighting Method and Computer Program. Patent No. WO/2017/148764. Germany. [2017, September 08].Google Scholar
Ley, P.-P.; Held, M. P.; Wolf, A.; Lachmayer, R. (2018). Konzepte zur Beleuchtung von Lichtmodulatoren. in DGaO Proceedings, Deutsche Gesallschaft für angewandte Optik, Aalen, 22–26 May, https://doi.org/10.15488/4085Google Scholar
Knöchelmann, M.; Wolf, A.; Kloppenburg, G.; Lachmayer, R. (2018). Aktiver Scheinwerfer mitGoogle Scholar
DMD-Technologie zur Erzeugung vollständiger Lichtverteilungen. in VDI Berichte 2323, Optische Technologien in der Fahrzeuglichttechnik, Karlsruhe, 5-6 June.Google Scholar
Lee, T. and Park, G. and Kim, H. and Park, I. and Lee, K., Ahn, B. (2011). The Development of the Automotive Headlamp using the DMD. in ISAL 2011 Proceedings, 9th International Symposium on Automotive Lighting, Darmstadt, 26-28 September.Google Scholar
Held, M. P.; Ley, P. P.; Wolf, A.; Lachmayer, R. (2018). Anforderungen an die Ausleuchtung von Lichtmodulatoren. in DGaO Proceedings, Deutsche Gesallschaft für angewandte Optik, Aalen, 22–26 May, https://doi.org/10.15488/4084Google Scholar
Instruments, Texas (2018). DLP5530-Q1 0.55-inch 1.3 Megapixel DMD for Automotive Interior Display. URL: http://www.ti.com/lit/ds/symlink/dlp5530-q1.pdfGoogle Scholar
Ilango, S.; Knöchelmann, M.; Kahrs, L. A.; Wolf, A.; Ortmaier, T.; Lachmayer, R. (2018). User evaluation study on illumination requirements to design an augmented reality projector for open liver surgery. in Proceedings of SPIE 10693, SPIE Optical Systems Design, Frankfurt, 14th - 17th May, https://doi.org/10.1117/12.2309667Google Scholar