Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T09:08:44.400Z Has data issue: false hasContentIssue false

Optimization Approaches in Design for Additive Manufacturing

Published online by Cambridge University Press:  26 July 2019

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

Nowadays, topology optimization and lattice structures are being re-discovered thanks to Additive Manufacturing technologies, that allow to easily produce parts with complex geometries.

The primary aim of this work is to provide an original contribution for geometric modeling of conformal lattice structures for both wireframe and mesh models, improving previously presented methods. The secondary aim is to compare the proposed approaches with commercial software solutions on a piston rod as a case study.

The central part of the rod undergoes size optimization of conformal lattice structure beams diameters using the proposed methods, and topology optimization using commercial software tool. The optimized lattice is modeled with a NURBS approach and with the novel mesh approach, while the topologically optimized part is manually remodeled to obtain a proper geometry. Results show that the lattice mesh modelling approach has the best performance, resulting in a lightweight structure with smooth surfaces and without sharp edges at nodes, enhancing mechanical properties and fatigue life.

Information

Type
Article
Creative Commons
Creative Common License - CCCreative Common License - BYCreative Common License - NCCreative Common License - ND
This is an Open Access article, distributed under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives licence (http://creativecommons.org/licenses/by-nc-nd/4.0/), which permits non-commercial re-use, distribution, and reproduction in any medium, provided the original work is unaltered and is properly cited. The written permission of Cambridge University Press must be obtained for commercial re-use or in order to create a derivative work.
Copyright
© The Author(s) 2019