Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T17:48:01.537Z Has data issue: false hasContentIssue false

Sequential Updating of Quantitative Requirements for Increased Flexibility in Robust Systems Design

Published online by Cambridge University Press:  26 July 2019

Matthias Funk*
Affiliation:
BMW, Department of Preliminary Design for Vehicle Dynamics;
Marcus Jautze
Affiliation:
Hochschule Landshut University of Applied Sciences, Mechanical Engineering;
Manfred Strohe
Affiliation:
Hochschule Landshut University of Applied Sciences, Mechanical Engineering;
Markus Zimmermann
Affiliation:
Technische Universität München, Laboratory for Product Development and Lightweight Design
*
Contact: Funk, Matthias, BMW Group, Department of Preliminary Design for Vehicle Dynamics, Germany, matthias.funk@bmw.de

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

In early development stages of complex systems, interacting subsystems (including components) are often designed simultaneously by distributed teams with limited information exchange. Distributed development becomes possible by assigning teams independent design goals expressed as quantitative requirements equipped with tolerances to provide flexibility for design: so-called solution-spaces are high-dimensional sets of permissible subsystem properties on which requirements on the system performance are satisfied. Edges of box-shaped solution spaces are permissible intervals serving as decoupled (mutually independent) requirements for subsystem design variables. Unfortunately, decoupling often leads to prohibitively small intervals. In so-called solution-compensation spaces, permissible intervals for early-decision variables are increased by a compensation mechanism using late-decision variables. This paper presents a multi-step development process where groups of design variables successively change role from early-decision to late-decision type in order to maximize flexibility. Applying this to a vehicle chassis design problem demonstrates the effectiveness of the approach.

Information

Type
Article
Creative Commons
Creative Common License - CCCreative Common License - BYCreative Common License - NCCreative Common License - ND
This is an Open Access article, distributed under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives licence (http://creativecommons.org/licenses/by-nc-nd/4.0/), which permits non-commercial re-use, distribution, and reproduction in any medium, provided the original work is unaltered and is properly cited. The written permission of Cambridge University Press must be obtained for commercial re-use or in order to create a derivative work.
Copyright
© The Author(s) 2019