Hostname: page-component-7b7567c8c-2rsb6 Total loading time: 0 Render date: 2026-11-12T07:10:11.513Z Has data issue: false hasContentIssue false

Polygonal Patterned Ground in Central New Jersey

Published online by Cambridge University Press:  20 January 2017

James C. Walters*
Affiliation:
Department of Earth Science, University of Northern Iowa, Cedar Falls, Iowa 50613 USA

Abstract

Polygonal patterned ground and associated sediment-filled wedges occur in thin-bedded shale in central New Jersey. During a dry growing season, numerous areas of polygonal ground were visible owing to differential growth of vegetation over the sediment-filled fractures. Construction sites where material was removed from the surface prior to excavation also revealed areas of polygonal ground. Measurements of the patterns show networks of polygons with diameters ranging from about 3 m to over 30 m, with an average of approximately 20 m. The wedges examined in vertical exposures range in depth from 25 to 260 cm (average, 125 cm) and in width from 10 to 240 cm (average, 50 cm). The infilling material of the wedges is mostly a sandy loam, although this material is not homogeneous throughout the wedges. The presence of ventifacts and frosted sand grains within the wedges indicates eolian activity during the formation of these features. The polygonal ground and wedge structures exhibit several characteristics similar to those of ice-wedge casts, and available evidence suggests they may have originated as ice-wedge polygons during the last glacial maximum.

Information

Type
Original Articles
Copyright
University of Washington

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable