Hostname: page-component-74656f9884-rdgjk Total loading time: 0 Render date: 2026-11-09T06:38:43.388Z Has data issue: false hasContentIssue false

10Be Analyses with a Compact AMS Facility—Are Bef2 Samples the Solution?

Published online by Cambridge University Press:  18 July 2016

L Wacker*
Affiliation:
Institute for Particle Physics, ETH Hönggerberg, CH-8093 Zürich, Switzerland.
M Grajcar
Affiliation:
Institute for Particle Physics, ETH Hönggerberg, CH-8093 Zürich, Switzerland.
S Ivy-Ochs
Affiliation:
Institute for Particle Physics, ETH Hönggerberg, CH-8093 Zürich, Switzerland.
PW Kubik
Affiliation:
Paul Scherrer Institut (PSI), c/o Institute for Particle Physics, ETH Hönggerberg, CH-8093 Zürich, Switzerland.
M Suter
Affiliation:
Institute for Particle Physics, ETH Hönggerberg, CH-8093 Zürich, Switzerland.
*
Corresponding author. Email: wacker@phys.ethz.ch.
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

The injection of 10BeF- instead of 10BeO- into a compact accelerator mass spectrometry system with a terminal voltage of 0.58 MV was investigated, because BF- molecules are unstable and isobaric interference of 10B with 10Be can thus be significantly reduced. We describe the method we developed to prepare BeF2 samples. 10Be was measured in a segmented gas ionization detector. Separation of 10Be from 10B could be achieved both for ions in the 1+ charge state with an energy of 0.8 MeV and in the 2+ charge state with an energy of 1.4 MeV. The 2+ ions are better separated, whereas the 1+ charge state has a higher transmission. 10Be/9Be ratios (~10-12) in a suite of rock samples were successfully determined for exposure dating in either charge state and compared with measurements made on the 6MV tandem.

Information

Type
Articles
Copyright
Copyright © 2004 by the Arizona Board of Regents on behalf of the University of Arizona