Hostname: page-component-7b7567c8c-w7t8q Total loading time: 0 Render date: 2026-11-19T01:46:16.388Z Has data issue: false hasContentIssue false

Evaluation of Possible Contamination Sources in the 14C Analysis of Bone Samples by FTIR Spectroscopy

Published online by Cambridge University Press:  18 July 2016

Marisa D'Elia
Affiliation:
Department of Engineering of Innovation and CEDAD, University of Lecce, Lecce, Italy
Gabriella Gianfrate
Affiliation:
Department of Engineering of Innovation and CEDAD, University of Lecce, Lecce, Italy
Gianluca Quarta*
Affiliation:
Department of Engineering of Innovation and CEDAD, University of Lecce, Lecce, Italy
Livia Giotta
Affiliation:
Department of Materials Science, University of Lecce, Lecce, Italy
Gabriele Giancane
Affiliation:
Department of Engineering of Innovation and CEDAD, University of Lecce, Lecce, Italy
Lucio Calcagnile
Affiliation:
Department of Engineering of Innovation and CEDAD, University of Lecce, Lecce, Italy
*
Corresponding author. Email: gianluca.quarta@unile.it
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

In the sample preparation laboratory of CEDAD (CEnter for DAting and Diagnostics) of the University of Lecce, a protocol for the quality control of bone samples based on infrared spectroscopy has been set up. The protocol has been recently developed as a check-in test with the aim to identify the presence of collagen in the samples, assess its preservation status, and determine whether the submitted bone samples are suitable for accelerator mass spectrometry (AMS) radiocarbon measurements or not. We discuss in this paper the use of infrared-based techniques to identify the presence of “contaminants” such as restoration and consolidation materials, humic acids, and soil carbonates, which, if not removed by the sample processing chemistry, can be sources of exogenous carbon and can thus influence the accuracy of the 14C determinations.

Bone samples recovered in well-defined and previously dated archaeological contexts were intentionally contaminated, submitted to the standard method for collagen extraction and purification, and then characterized by means of Fourier transform infrared (FTIR) spectroscopy analyses performed in attenuated total reflection (ATR) mode before being combusted, converted to graphite, and measured by AMS. The study shows that the ATR-FTIR technique is an extremely powerful method for the identification of both the collagen and its contaminants and can supply important information during the selection and processing of samples to be submitted for 14C dating.

Information

Type
Articles
Copyright
Copyright © 2007 by the Arizona Board of Regents on behalf of the University of Arizona