Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-17T06:34:07.811Z Has data issue: false hasContentIssue false

EXPERIMENTAL CONDITIONS FOR 14C GRAPHITE PREPARATION AT THE GXNU LAB, CHINA

Published online by Cambridge University Press:  20 September 2024

Hongtao Shen*
Affiliation:
College of Physics and Technology, Guangxi Normal University, Guilin Guangxi 541004, ChinaGuangxi Key Laboratory of Nuclear Physics and Technology, Guilin Guangxi 541004, China
Dingxiong Chen
Affiliation:
College of Physics and Technology, Guangxi Normal University, Guilin Guangxi 541004, China
Li Wang
Affiliation:
College of Physics and Technology, Guangxi Normal University, Guilin Guangxi 541004, China
Zhaomei Li
Affiliation:
College of Physics and Technology, Guangxi Normal University, Guilin Guangxi 541004, China
Junsen Tang
Affiliation:
College of Physics and Technology, Guangxi Normal University, Guilin Guangxi 541004, ChinaGuangxi Key Laboratory of Nuclear Physics and Technology, Guilin Guangxi 541004, China
Guofeng Zhang
Affiliation:
College of Physics and Technology, Guangxi Normal University, Guilin Guangxi 541004, China
Linjie Qi
Affiliation:
College of Physics and Technology, Guangxi Normal University, Guilin Guangxi 541004, China
Kaiyong Wu
Affiliation:
College of Physics and Technology, Guangxi Normal University, Guilin Guangxi 541004, China
Xinyi Han
Affiliation:
College of Physics and Technology, Guangxi Normal University, Guilin Guangxi 541004, China
He Ouyang
Affiliation:
College of Physics and Technology, Guangxi Normal University, Guilin Guangxi 541004, China
Yun He
Affiliation:
College of Physics and Technology, Guangxi Normal University, Guilin Guangxi 541004, ChinaGuangxi Key Laboratory of Nuclear Physics and Technology, Guilin Guangxi 541004, China
Ning Wang
Affiliation:
College of Physics and Technology, Guangxi Normal University, Guilin Guangxi 541004, ChinaGuangxi Key Laboratory of Nuclear Physics and Technology, Guilin Guangxi 541004, China
Xiaojun Sun
Affiliation:
College of Physics and Technology, Guangxi Normal University, Guilin Guangxi 541004, ChinaGuangxi Key Laboratory of Nuclear Physics and Technology, Guilin Guangxi 541004, China
Ming He
Affiliation:
China Institute of Atomic Energy, Beijing 102413, China
Kimikazu Sasa
Affiliation:
University of Tsukuba, Tsukuba, Ibaraki 305-8577, Japan
Shan Jiang
Affiliation:
China Institute of Atomic Energy, Beijing 102413, China
*
*Corresponding author. Email: shenht@gxnu.edu.cn
Rights & Permissions [Opens in a new window]

Abstract

As a required sample preparation method for 14C graphite, the Zn-Fe reduction method has been widely used in various laboratories. However, there is still insufficient research to improve the efficiency of graphite synthesis, reduce modern carbon contamination, and test other condition methodologies at Guangxi Normal University (GXNU). In this work, the experimental parameters, such as the reduction temperature, reaction time, reagent dose, Fe powder pretreatment, and other factors, in the Zn-Fe flame sealing reduction method for 14C graphite samples were explored and determined. The background induced by the sample preparation process was (2.06 ± 0.55) × 10–15, while the 12C– beam current were better than 40μA. The results provide essential instructions for preparing 14C graphite of ∼1 mg at the GXNU lab and technical support for the development of 14C dating and tracing, contributing to biology and environmental science.

Information

Type
Conference Paper
Copyright
© The Author(s), 2024. Published by Cambridge University Press on behalf of University of Arizona
Figure 0

Figure 1Layout of the 14C sample vacuum line.

Figure 1

Figure 2A customized 10-hole graphite reduction furnace (a) and the reduction tube after graphitization using the customized furnace (b) and muffle furnace (c).

Figure 2

Table 1Experimental results of reduction furnaces.

Figure 3

Table 2AMS results of different CuO treatments.

Figure 4

Table 3Experimental results of CuO dose and CO2 recovery rate in the combustion.

Figure 5

Table 4Results of the Fe powder pretreatment experiment.

Figure 6

Figure 3Relationship between Fe/C and 14C/12C.

Figure 7

Figure 4Relationship between 12C– beam current and Fe/C ratio. (a) Fe/C >1, and (b) Fe/C <1.

Figure 8

Figure 5Relationship between Zn/C and 14C/12C of blank samples.

Supplementary material: File

Shen et al. supplementary material

Shen et al. supplementary material
Download Shen et al. supplementary material(File)
File 189.4 KB