Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-14T10:26:02.911Z Has data issue: false hasContentIssue false
  • English
  • Français

High-Current 14C Measurements on an HVE 1MV AMS System

Published online by Cambridge University Press:  09 February 2016

Matthias Klein,
A Gottdang and
D J W Mous
Matthias Klein
Affiliation:
High Voltage Engineering Europa B.V., PO Box 99, 3800 AB Amersfoort, the Netherlands. Email: info@highvolteng.com
A Gottdang
Affiliation:
High Voltage Engineering Europa B.V., PO Box 99, 3800 AB Amersfoort, the Netherlands. Email: info@highvolteng.com
D J W Mous
Affiliation:
High Voltage Engineering Europa B.V., PO Box 99, 3800 AB Amersfoort, the Netherlands. Email: info@highvolteng.com
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

High radiocarbon sample throughput is an increasingly important requirement of accelerator mass spectrometry (AMS) systems, which in turn requires high source output. To accomplish this, HVE AMS systems use a model SO-110B ion source, which can run at outputs of more than 200 μA 12C. It is known that high source output may compromise precision. To quantify this effect, we have tested an HVE 1MV AMS system for the influence of medium (100 μA) and high (200 μA) source outputs on the precision. These early measurements indicate for a 200 μA 12C source output, equivalent to a ≃1 kHz 14C count rate for Ox II samples, a 13C/12C precision of 1% and a 14C/12C precision of 3% can be obtained.

Information

Type
Articles
Information
Radiocarbon , Volume 55 , Issue 2: Proceedings of the 21st International Radiocarbon Conference (Part 1 of 2) , 2013, pp. 224 - 230
Copyright
Copyright © 2013 by the Arizona Board of Regents on behalf of the University of Arizona 

References

Fallon, SJ, Guilderson, TP, Brown, TA. 2007. CAMS/LLNL ion source efficiency revisited. Nuclear Instruments and Methods in Physics Research B 259(1):106–10.CrossRefGoogle Scholar
Freeman, SPHT, Cook, GT, Dougans, AB, Naysmith, P, Wilcken, KM, Xu, S. 2010. Improved SSAMS performance. Nuclear Instruments and Methods in Physics Research B 268(7–8):715–7.CrossRefGoogle Scholar
Klein, M, Mous, DJW, Gottdang, A. 2004. Fast and accurate sequential injection AMS with gated Faraday cup current measurement. Radiocarbon 46(1):77–82.CrossRefGoogle Scholar
Klein, M, Mous, DJW, Gottdang, A. 2006. A compact 1MV multi-element AMS system. Nuclear Instruments and Methods in Physics Research B 249(1–2):764–7.CrossRefGoogle Scholar
Klein, M, Staveren, HJ, Mous, DJW, Gottdang, A. 2007. Performance of the compact HVE 1 MV multi-element AMS system. Nuclear Instruments and Methods in Physics Research B 259(1):184–7.CrossRefGoogle Scholar
Roberts, ML, Burton, JR, Elder, KL, Longworth, BE, McIntyre, CP, von Reden, KF, Han, BX, Rosenheim, BE, Jenkins, WJ, Galutschek, E, McNichol, AP. 2010. A high-performance 14C accelerator mass spectrometer. Radiocarbon 52(2):228–35.CrossRefGoogle Scholar