Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-13T20:17:14.487Z Has data issue: false hasContentIssue false

The Low-Energy Isobar Separator for Anions: Progress Report

Published online by Cambridge University Press:  18 July 2016

W E Kieser*
Affiliation:
IsoTrace Laboratory, University of Toronto, 60 Saint George St., Toronto, Ontario M5S 1A7, Canada
John Eliades
Affiliation:
IsoTrace Laboratory, University of Toronto, 60 Saint George St., Toronto, Ontario M5S 1A7, Canada
A E Litherland
Affiliation:
IsoTrace Laboratory, University of Toronto, 60 Saint George St., Toronto, Ontario M5S 1A7, Canada
Xiaolei Zhao
Affiliation:
IsoTrace Laboratory, University of Toronto, 60 Saint George St., Toronto, Ontario M5S 1A7, Canada
Lisa Cousins
Affiliation:
Ionics Mass Spectrometry Group, 32 Nixon Road, Unit 1, Bolton, Ontario L7E 1W2, Canada
S J Ye
Affiliation:
Ionics Mass Spectrometry Group, 32 Nixon Road, Unit 1, Bolton, Ontario L7E 1W2, Canada
*
Corresponding author. Email: liam.kieser@utoronto.ca
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

The suppression of interferences from atomic and molecular isobars is a key requirement for the extension of accelerator mass spectrometry (AMS) to the analysis of new cosmogenic isotopes and for increasing the range of applications for small AMS systems. In earlier work, it was shown that unwanted isobars can be eliminated by anion-gas reactions (Litherland et al. 2007). Recently, a prototype system in which such reactions could be applied to ions from an AMS ion source, the Isobar Separator for Anions (ISA), was described (Eliades et al. 2009). This system decelerates the beam of rare anions from keV to eV energies, guides them through a single radiofrequency quadrupole (RFQ) gas cell, and re-accelerates them for further analysis in a 2.5MV AMS system. Tests of this system with Cl and S anions and NO2 gas showed a suppression of S with respect to Cl of over 6 orders of magnitude, with a transmission of ∼30% for the Cl beam. In this work, results of the analysis of a range of standard reference materials are reported; these show the linearity of the system for measuring the 36Cl/35Cl ratio over a span of 2 orders of magnitude. Further tests, using the AMS system as a diagnostic tool, have provided clues about the loss of Cl at higher cell pressure and the nature of the residual low level of S transmission. These lead to the assessment of various gases for cooling the Cl– beam. Suppression measurements for 41K in the analysis of 41Ca, using NO2 as a reaction gas, are also discussed. These preliminary measurements have provided data for the development of a more advanced system with separate cooling and reaction cells.

Information

Type
Accelerator Mass Spectrometry
Copyright
Copyright © 2010 by the Arizona Board of Regents on behalf of the University of Arizona