Hostname: page-component-7b7567c8c-m6dxt Total loading time: 0 Render date: 2026-11-19T06:46:59.530Z Has data issue: false hasContentIssue false

National Physical Laboratory Radiocarbon Measurements I

Published online by Cambridge University Press:  18 July 2016

W. J. Callow
Affiliation:
National Physical Laboratory, Teddington, England
M. J. Baker
Affiliation:
National Physical Laboratory, Teddington, England
D. H. Pritchard
Affiliation:
National Physical Laboratory, Teddington, England
Rights & Permissions [Opens in a new window]

Extract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

The dating equipment at the National Physical Laboratory was completed by the summer of 1960. A series of calibration and intercomparison measurements was undertaken however, using the NBS oxalic acid reference standard, a modern wood standard (1850 oak tree) and other material before starting routine measurements toward the end of 1961. All results have been obtained using a 4.5 L copper proportional counter filled with CO2 at a constant density corresponding to standard conditions of 22°C and an absolute pressure of 150 cm Hg. The counter is shielded by 8 in. of steel, 6 in. of paraffin wax containing boric oxide, 23 Geiger counters arranged as two independent groups and finally by 1 in. of mercury.

Information

Type
Research Article
Copyright
Copyright © The American Journal of Science