Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-12T08:29:07.045Z Has data issue: false hasContentIssue false
  • English
  • Français

Admissible trajectory determination for two cooperating robot arms

Published online by Cambridge University Press:  09 March 2009

Joonhong Lim and
Dong H. Chyung
Joonhong Lim
Affiliation:
Department of Electrical and Computer Engineering, University of Iowa, Iowa City, Iowa 52242 (U.S.A.)
Dong H. Chyung
Affiliation:
Department of Electrical and Computer Engineering, University of Iowa, Iowa City, Iowa 52242 (U.S.A.)
Get accessRights & Permissions [Opens in a new window]

Summary

The problem of finding an allowable object trajectory for a cooperating two-robot system is investigated. The purpose is to move an object from one point to another by firmly grasping it at two different points using two robotic hands. The major difficulty is caused by the fact that, unless the robots have true six degrees of freedom, the trajectories the object can follow are severely limited and, in general, are difficult to find. The method proposed in the paper is based on reformulating the problem as a nonlinear optimization problem with equality constraints in terms of the joint variables. The optimization problem is then solved numerically on a computer. The solution automatically gives the corresponding joint variable trajectories as well, thus eliminating the need for solving the inverse kinematic problem. The method has been successfully applied to a real experimental system.

Keywords

Robot ArmsTrajectoryCooperating

Information

Type
Research Article
Information
Robotica , Volume 6 , Issue 2 , April 1988, pp. 107 - 113
Copyright
Copyright © Cambridge University Press 1988

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1.Lim, J. and Chyung, D.H., “Resolved Position Control for Two Cooperating Robot Arms” Robotica 5, No. 1, 9–15 (1987).Google Scholar
2.Colson, J.C. and Perreira, N.D., “Kinematic arrangements used in industrial robots” Proceedings of the 13th International Symposium on Industrial Robots 20–1 to 201–18 (1983).Google Scholar
3.Sandhu, H., “The RHINO XR-1” Robotics Age 10–18 (03/04, 1982).Google Scholar
4.Paul, R.P. and Stevenson, C.N., “Kinematics of robot wrists” International J. Robotics Res. 2, no. 2, 31–38 (Spring, 1983).CrossRefGoogle Scholar
5.Sadre, A., Smith, R. and Cartwright, W., “Coordinate transformations for two industrial robots” Proceedings of the IEEE 1984 International Conference on Robotics45–61 (1984).Google Scholar
6.Sugimoto, K. and Duffy, J., “Analysis of five-degree-of-freedom robot arms” ASME J. Mechanism, Transmissions, and Automation in Design 105, 23–27 (03, 1983).Google Scholar
7.Paul, R.P., Robot manipulators: Mathematics, Programming and Control (MIT Press, Cambridge, Mass., 1981).Google Scholar
8.Luenberger, D.G., Introduction to linear and nonlinear programming (Addison-Wesley Publishing Company, New York, 1973).Google Scholar
9.Singh, M.G. and Titli, A., Systems: decomposition, optimisation, and control (Pergamon Press, Oxford, 1978).Google Scholar
10.Lim, J., Cooperative Control of Two Robot Arms, Ph.D. Thesis (Dept. of Electrical and Computer Engineering, The University of Iowa, 05, 1986).Google Scholar