Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-14T22:39:14.656Z Has data issue: false hasContentIssue false
  • English
  • Français

A practical application of fluid power systems in manufacturing

Published online by Cambridge University Press:  09 March 2009

Samir B. Billatos
Samir B. Billatos
Affiliation:
Department of Mechanical EngineeringUniversity of Connecticut StorrsCT 06269–3139 (USA)
Get accessRights & Permissions [Opens in a new window]

Summary

Fluid power is one of the vast fields and its applications in manufacturing are not used for many real-time problems though its capabilities are known. One such application is fluid power for robotic systems. More specifically, in this study, a new hydraulic system is developed for use in actuating a robotic gripper. Electric motors were found unsatisfactory due to their poor power to weight ratio. Hydraulics were attempted using a master slave hydraulic system. Powering and positioning was done on the master cylinder, while the remote slave cylinder followed the motion. The control of the master cylinder was done with a ground based stepping motor and lead screw mechanism. Small hoses ran to the gripper based slave cylinder, which copied the motions.

Information

Type
Research Article
Information
Robotica , Volume 11 , Issue 5 , September 1993, pp. 475 - 482
Copyright
Copyright © Cambridge University Press 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1.Walters, R.B., Hydraulic and Electro Hydraulic Control Systems (Elsevier Applied Science, New York, 1991).CrossRefGoogle Scholar
2.Kleman, A., Interfacing Microprocessors in Hydraulic Systems (Marcel Dekker Inc, New York, 1989).Google Scholar
3.Schneider, R., “Ideas & Applications: Encoders enhance hydraulic motors for precise motion control”, Hydraulics & Pneumatics 8–10 (November, 1990).Google Scholar
4.Shahinpoor, M., A Robot Engineering Textbook (Harper and Row, New York, 1987).Google Scholar
5.Clippard Instrument Laboratory, Inc. Cincinnati, Ohio (1990).Google Scholar
6.Lee Company, “Technical Hydraulic Handbook”, Westbrook, Ct, 1989 (USA).Google Scholar
7.White, F.M., Fluid Mechanics, (McGraw-Hill, New York, 1979).Google Scholar
8.Schneider, R., “Ideas & Applications: Some thoughts about on-board electronics”, Hydraulics & Pneumatics 14–16 (January, 1990).Google Scholar
9.Henke, R., “Integration Is Key to 1990's Fluid Power Systems” Control Engineering 40–44 (August, 1988).Google Scholar
10.Mollo, J.R., “Load-sensing pumps: has their time come? Part 1: load and flow-sensing pumps are increasingly important to circuit designers” Hydraulics & Pneumatics, 57–60 (May, 1990).Google Scholar
11.Mollo, J.R., “Load-sensing pumps: has their time come?, Part 1: load and flow-sensing pumps are increasingly important to circuit designers” Hydraulics & Pneumatics, 57–60 (July, 1990).Google Scholar
12.Yeaple, F., Fluid Power Design Handbook (Marcel Dekker, Inc., New York, 1990).Google Scholar
13.Henke, R., “Microelectronic control of hydraulic systems, Part 1: Trends towards using microprocessors and microcomputers” Hydraulics & Pneumatics, 45–48 (March, 1985).Google Scholar