Hostname: page-component-7b7567c8c-m6dxt Total loading time: 0 Render date: 2026-11-18T22:58:34.758Z Has data issue: false hasContentIssue false

Adding flexibility to the links of a rigid-link dynamic model of an articulated robot

Published online by Cambridge University Press:  09 March 2009

A. Bodner
Affiliation:
ACTA, Inc., Plaza de Rina, Suite 101, 24430 Hawthorne Blvd. Torrance CA 90505 (USA)

Summary

A method was developed that takes into account flexibility of robot links in the inverse dynamics calculations. This method uses the Newton-Euler equations and is applicable for special case systems that allow for only a small degree of flexibility. Application of the method should improve the accuracy of the position of the end effector during motion of the robot.

The results of this study show that the method can be based entirely on an existing rigid-link model with only minimal changes required as additions. The computational complexity of the method is discussed briefly as well and indicates an increase of computations of slightly more than a factor of two as compared to a rigid-link model for the same robot geometry.

Information

Type
Research Article
Copyright
Copyright © Cambridge University Press 1989

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable