Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-16T11:45:31.886Z Has data issue: false hasContentIssue false

The AMP-Foot 2.1 : actuator design, control and experiments with an amputee

Published online by Cambridge University Press:  02 September 2014

Pierre Cherelle*
Affiliation:
Mechanical Engineering Department, Vrije Universiteit Brussel, Brussels, Belgium
Karen Junius
Affiliation:
Mechanical Engineering Department, Vrije Universiteit Brussel, Brussels, Belgium
Victor Grosu
Affiliation:
Mechanical Engineering Department, Vrije Universiteit Brussel, Brussels, Belgium
Heidi Cuypers
Affiliation:
Mechanical Engineering Department, Vrije Universiteit Brussel, Brussels, Belgium
Bram Vanderborght
Affiliation:
Mechanical Engineering Department, Vrije Universiteit Brussel, Brussels, Belgium
Dirk Lefeber
Affiliation:
Mechanical Engineering Department, Vrije Universiteit Brussel, Brussels, Belgium
*
*Corresponding author. E-mail: pierre.cherelle@vub.ac.be
Rights & Permissions [Opens in a new window]

Summary

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

The Ankle Mimicking Prosthetic (AMP-) Foot 2 is a new energy efficient, powered transtibial prosthesis mimicking intact ankle behavior. The author's research is focused on the use of a low power actuator which stores energy in springs during the complete stance phase. At push-off, this energy can be released hereby providing propulsion forces and torques to the amputee. With the use of the so-called catapult actuator, the size and weight of the drive can be decreased compared to state-of-the-art powered prostheses, while still providing the full power necessary for walking.

In this article, the authors present a detailed description of the catapult actuator followed by a comparison with existing actuator technology in powered prosthetic feet with regard to torque and power requirements. The implication on the actuator's design will then be outlined. Further, a description of the control strategy behind the AMP-Foot 2 and 2.1 will be given. In the last section of the article, the actuation principle and control are illustrated by experimental validation with a transfemoral amputee. Conclusions and future work complete the paper.

Information

Type
Articles
Copyright
Copyright © Cambridge University Press 2014