Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T06:29:48.065Z Has data issue: false hasContentIssue false

Analytical Procedure Based on the Matrix Structural Method for the Analysis of the Stiffness of the 2PRU–1PRS Parallel Manipulator

Published online by Cambridge University Press:  31 January 2019

Saioa Herrero*
Affiliation:
Department of Mechanical Engineering, University of the Basque Country, Bilbao, Spain. E-mails: charles.pinto@ehu.eus, mikel.diez@ehu.eus, j.corral@ehu.eus
Charles Pinto
Affiliation:
Department of Mechanical Engineering, University of the Basque Country, Bilbao, Spain. E-mails: charles.pinto@ehu.eus, mikel.diez@ehu.eus, j.corral@ehu.eus
Mikel Diez
Affiliation:
Department of Mechanical Engineering, University of the Basque Country, Bilbao, Spain. E-mails: charles.pinto@ehu.eus, mikel.diez@ehu.eus, j.corral@ehu.eus
Javier Corral
Affiliation:
Department of Mechanical Engineering, University of the Basque Country, Bilbao, Spain. E-mails: charles.pinto@ehu.eus, mikel.diez@ehu.eus, j.corral@ehu.eus
*
*Corresponding author. E-mail: saioa.herrero@ehu.eus
Rights & Permissions [Opens in a new window]

Summary

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

Parallel manipulators, especially those with outputs as one translation and two rotations (1T2R), are being increasingly studied. The kinematic chains of parallel manipulators share the loads and make the stiffness higher than the stiffness of serial manipulators with equivalent limbs. This high stiffness ensures a minimal deformation of the limbs, allowing a high positioning accuracy of the endeffector. Thus, it is very important to be able to measure the stiffness in parallel manipulators. In this work, we present a novel 1T2R multi-axial shaking table (MAST) for automobile pieces testing purposes—the 2PRU–1PRS parallel manipulator—and focus on the analysis of its stiffness all over the useful workspace. Analysis methods based on matrix structural method need to be validated for every parallel manipulator, and we present these steps along with a comparison between experimental and analytical methods.

Information

Type
Articles
Copyright
© Cambridge University Press 2019