Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T10:28:56.814Z Has data issue: false hasContentIssue false

Coordinated-motion control of heavy-duty industrial machines with redundancy

Published online by Cambridge University Press:  09 March 2009

N. Singh
Affiliation:
Department of Mechanical and Industrial Engineering, University of Manitoba, Winnipeg, MB (Canada) R3T-2N2
H. Zghal
Affiliation:
Department of Mechanical and Industrial Engineering, University of Manitoba, Winnipeg, MB (Canada) R3T-2N2
N. Sepehri
Affiliation:
Department of Mechanical and Industrial Engineering, University of Manitoba, Winnipeg, MB (Canada) R3T-2N2
S. Balakrishnan
Affiliation:
Department of Mechanical and Industrial Engineering, University of Manitoba, Winnipeg, MB (Canada) R3T-2N2
P. D. Lawrence
Affiliation:
Department of Electrical Engineering, University of British Columbia, Vancouver, BC (Canada) V6T-1W5.

Summary

An implementation of a real-time scheme suitable for coordinated-motion control of a class of teleoperated industrial machines with redundancy is presented. An efficient gradient projection technique is adopted for the numerical solution. The scheme utilizes the redundancy to avoid the joint limits by minimizing a hyperbolic function of the joint distances from the mid-range. This new performance criterion is shown to be advantageous over similar criteria; both the joint-limit avoidance capability and the resulting joint velocity profiles can be adjusted by the appropriate choice of parameters introduced in the criterion. Previous criteria are shown to be special cases of the new criterion. Furthermore, the scheme includes a novel algorithm which incorporates the bounded joint velocities. The joint motions are determined considering both the required task in terms of the desired end-effector speed and the dynamic considerations, such as hydraulic circuit interdependency and power limitations.

The feasibility and effectiveness of the implementation of the scheme is first tested through simulations of a Kaiser Spyder-like excavator machine on a PC-486 micro-computer. The robustness and real-time response of the scheme are then validated on a real-time excavator-based graphics simulator interfaced to a human operator through a joystick.

Information

Type
Articles
Copyright
Copyright © Cambridge University Press 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable