Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-16T02:14:08.622Z Has data issue: false hasContentIssue false

Design and study of a novel hyper-redundant manipulator

Published online by Cambridge University Press:  02 March 2021

Yanming Li
Affiliation:
The Research Institute of Robotics, School of Mechanical Engineering, Shanghai JiaoTong University, 1954 Huashan Road, Shanghai, 200030 (P.R. China)
Peisun Ma
Affiliation:
The Research Institute of Robotics, School of Mechanical Engineering, Shanghai JiaoTong University, 1954 Huashan Road, Shanghai, 200030 (P.R. China)
Changjun Qin
Affiliation:
The Research Institute of Robotics, School of Mechanical Engineering, Shanghai JiaoTong University, 1954 Huashan Road, Shanghai, 200030 (P.R. China)
Xueguan Gao
Affiliation:
The Research Institute of Robotics, School of Mechanical Engineering, Shanghai JiaoTong University, 1954 Huashan Road, Shanghai, 200030 (P.R. China)
Jianbin Wang
Affiliation:
The Research Institute of Robotics, School of Mechanical Engineering, Shanghai JiaoTong University, 1954 Huashan Road, Shanghai, 200030 (P.R. China)
Haihong Zhu
Affiliation:
Intelligent Machine Dynamic Laboratory, School of Mechanical Engineering, Georgia Institute of Technology, Atlanta Georgia 300332 (USA)
Rights & Permissions [Opens in a new window]

Summary

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

A novel hyper-redundant manipulator named RT1 is presented in this paper. The key feature of RT1 is that all degrees of freedom (DOF) are actuated with only one motor, via specially designed hinge bar universal joints. The mechanism of RT1 which includes a special hinge bar universal joint, bend structure and motion diversion structure is described. RT1 is a discrete manipulator; the discrete working space is described, and the parameter optimization for kinematical redundancy resolution is also studied. In selecting the unit increment of joints angles as an optimizing parameter, the criterion used is to alter the design parameter as little as possible during the manipulator’s motion from the initial to the expected position.

Information

Type
Research Article
Copyright
Copyright © Cambridge University Press 2003