Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-16T05:12:45.556Z Has data issue: false hasContentIssue false

Design, kinematic and dynamic modeling of a novel tripod based manipulator

Published online by Cambridge University Press:  23 December 2014

Dan Zhang*
Affiliation:
University of Ontario Institute of Technology, 2000 Simcoe Street North, Oshawa, Ontario, L1H 7K4, Canada
Bin Wei
Affiliation:
University of Ontario Institute of Technology, 2000 Simcoe Street North, Oshawa, Ontario, L1H 7K4, Canada
*
*Corresponding author. E-mail: Dan.Zhang@uoit.ca
Rights & Permissions [Opens in a new window]

Summary

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

This paper proposes a novel three-degrees-of-freedom (3-DOF) hybrid manipulator, 3PU*S-PU, which evolves from the general function (Gf) set theory. After discussing the advantages of this new type of hybrid manipulator, this report analyzes the kinematic and Jacobian matrix of the manipulator. Subsequently, the kinematic performances, including stiffness/compliance, and workspace, undergo analysis, followed by the multi-objective optimization of the compliance and workspace. The Lagrangian method provides the framework for briefly analyzing the dynamics of the proposed manipulator. Finally, the results of this assessment comprise a guideline for controlling the manipulator.

Information

Type
Articles
Copyright
Copyright © Cambridge University Press 2014