Hostname: page-component-74656f9884-8r8nv Total loading time: 0 Render date: 2026-11-10T01:13:16.977Z Has data issue: false hasContentIssue false

Desired model compensation-based position constrained control of robotic manipulators

Published online by Cambridge University Press:  14 May 2021

Samet Gul
Affiliation:
Department of Computer Engineering, Gebze Technical University, 41400, Gebze, Kocaeli, Turkey
Erkan Zergeroglu*
Affiliation:
Department of Computer Engineering, Gebze Technical University, 41400, Gebze, Kocaeli, Turkey
Enver Tatlicioglu
Affiliation:
Department of Electrical & Electronics Engineering, Ege University, 35100, Bornova, Izmir, Turkey
Mesih Veysi Kilinc
Affiliation:
Institute of Information Technologies, Gebze Technical University, 41400, Gebze, Kocaeli, Turkey
*
*Corresponding author. Email: e.zerger@gtu.edu.tr
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

This work presents the design and the corresponding stability analysis of a desired model-based, joint position constrained, controller formulation for robotic manipulators. Specifically, provided that the initial joint position tracking error signal starts within some predefined region, the proposed controller ensures that the joint tracking error signal remains inside this region and approaches to zero asymptotically. Extensive numerical simulations and experimental studies performed on a two-link direct-drive planar robot are provided in order to illustrate the effectiveness and feasibility of the proposed controller.

Information

Type
Article
Copyright
© The Author(s), 2021. Published by Cambridge University Press