Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-16T08:52:38.104Z Has data issue: false hasContentIssue false

Development of a gecko-like robotic gripper using Scott–Russell mechanisms

Published online by Cambridge University Press:  14 June 2019

Mehdi Modabberifar*
Affiliation:
Department of Mechanical Engineering, Faculty of Engineering, Arak University, Arak, Iran
Matthew Spenko
Affiliation:
Department of Mechanical, Materials, and Aerospace Engineering, Illinois Institute of Technology, Chicago, IL, USA
*
*Corresponding author. E-mail: m-modabberifar@araku.ac.ir
Rights & Permissions [Opens in a new window]

Summary

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

This paper describes the development of a gecko-inspired robotic gripper for grasping flat objects using Scott–Russell mechanisms. Compared to previously reported grippers that utilize gecko-like adhesives, the one presented here produces higher normal adhesion and has robustness and controllability advantages. To verify the applicability of proposed gripper, a mechanical model and experimental results on a variety of substrates are presented. The experimental results demonstrated a 19.6% and 50% increase in normal adhesion using a preload of <15 and <30 N, respectively, compared to previously reported results under similar testing parameters and conditions.

Information

Type
Articles
Copyright
© Cambridge University Press 2019