Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-17T11:55:59.704Z Has data issue: false hasContentIssue false

Influence of backlash in gear reducer on dynamic of single-link manipulator arm

Published online by Cambridge University Press:  29 April 2014

Jian-Wei Lu*
Affiliation:
School of Mechanical and Automotive Engineering, Hefei University of Technology, 230009 Hefei, Anhui, P. R. China
Xiao-Ming Sun
Affiliation:
School of Mechanical and Automotive Engineering, Hefei University of Technology, 230009 Hefei, Anhui, P. R. China
Alexander F. Vakakis
Affiliation:
Department of Mechanical Science and Engineering, University of Illinois at Urbana-Champaign, Urbana 61801, USA
Lawrence A. Bergman
Affiliation:
Department of Aerospace Engineering, University of Illinois at Urbana-Champaign, Urbana 61801, USA
*
*Corresponding author. E-mail: jwlu75@163.com
Rights & Permissions [Opens in a new window]

Summary

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

The dynamic modeling of a flexible single-link manipulator arm with consideration of backlash in the planetary gear reducer at the joint is presented, and the influence of backlash on the dynamic response of the system is evaluated. A 2K-H planetary gear reducer with backlash was employed as an example to discuss the dynamic modeling of the sub-model of the planetary gear reducer, and the sub-model of the planetary gear reducer was established based on the lumped mass method. The flexible manipulator was regarded as an Euler--Bernoulli beam, and the dynamic model of the flexible manipulator arm with backlash in the planetary gear reducer was determined from Lagrange's equations. Based on the this model, the influence of the backlash in the planetary gear reducer and excitation frequency on the dynamic response of the system were evaluated through simulation, and the results showed that the dynamic response of the system is sensitive to the backlash and the excitation frequency simultaneously, which provides a theoretical foundation for improvement of dynamic modeling and control of the flexible manipulator arm.

Information

Type
Articles
Copyright
Copyright © Cambridge University Press 2014