Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T05:49:44.333Z Has data issue: false hasContentIssue false

Kinematic analysis and path planning of a new kinematically redundant planar parallel manipulator

Published online by Cambridge University Press:  01 May 2008

Iman Ebrahimi
Affiliation:
Department of Mechanical Engineering, University of New Brunswick, Fredericton, Canada
Juan A. Carretero*
Affiliation:
Department of Mechanical Engineering, University of New Brunswick, Fredericton, Canada
Roger Boudreau
Affiliation:
Département de génie mécanique, Université de Moncton, Moncton, Canada
*
*Corresponding author: E-mail address: Juan.Carretero@unb.ca
Rights & Permissions [Opens in a new window]

Summary

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

In this work, the 3-RPRR, a new kinematically redundant planar parallel manipulator with six-degrees-of-freedom, is presented. First, the manipulator is introduced and its inverse displacement problem discussed. Then, all types of singularities of the 3-RPRR manipulator are analysed and demonstrated. Thereafter, the dexterous workspace is geometrically obtained and compared with the non-redundant 3-PRR planar parallel manipulator. Finally, based on a geometrical measure of proximity to singular configurations and the condition number of the manipulators' Jacobian matrices, actuation schemes for the manipulators are obtained. Different actuation schemes for a given path are obtained and the quality of their actuation schemes are compared. It is shown that the proposed manipulator is capable of following a path while avoiding the singularities.

Information

Type
Article
Copyright
Copyright © Cambridge University Press 2008