Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T10:22:04.478Z Has data issue: false hasContentIssue false

Kinematic calibration of the Gough Platform

Published online by Cambridge University Press:  24 October 2003

David Daney
Affiliation:
INRIA, 2004 Route des Lucioles, BP 93, 06902 Sophia Antipolis Cedex (France) David.Daney@sophia.inria.fr
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

Kinematic calibration is essential to improve the accuracy of the manipulator. This paper presents a complete description of the Gough platform modeling and a unified scheme to identify its kinematic parameters. The interest of this formulation is that it may be applied whatever information is available on the state of the robot (measurement or constraints) without using the kinematics to obtain the basic system of constraint equations. Moreover, the scheme may be applied for all parallel robots. We propose to experiment and compare three methods of calibration, using either (or both) external measurement and internal redundant sensors. Finally, we show how to reduce the initial error in pose determination by 99% for the Hexapode 300, CMW's machining center, and validate the choice of a self-calibration method in an industrial context.

Information

Type
Research Article
Copyright
© 2003 Cambridge University Press