Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T10:39:46.160Z Has data issue: false hasContentIssue false

Kinematic Design Optimization of an Eight Degree-of-Freedom Upper-Limb Exoskeleton

Published online by Cambridge University Press:  25 June 2019

Amin Zeiaee*
Affiliation:
Department of Mechanical Engineering, Texas A&M University, College Station, TX, USA. E-mails: rana.soltani@tamu.edu, rlangari@tamu.edu
Rana Soltani-Zarrin
Affiliation:
Department of Mechanical Engineering, Texas A&M University, College Station, TX, USA. E-mails: rana.soltani@tamu.edu, rlangari@tamu.edu
Reza Langari
Affiliation:
Department of Mechanical Engineering, Texas A&M University, College Station, TX, USA. E-mails: rana.soltani@tamu.edu, rlangari@tamu.edu
Reza Tafreshi
Affiliation:
Department of Mechanical Engineering, Texas A&M University at Qatar, Doha, Qatar. E-mail: reza.tafreshi@qatar.tamu.edu
*
* Corresponding author. E-mail: amin.zeiaee@tamu.edu
Rights & Permissions [Opens in a new window]

Summary

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

This paper studies the problem of optimizing the kinematic structure of an eight degree-of-freedom upper-limb rehabilitation exoskeleton. The objective of optimization is achieving minimum volume and maximum dexterity in the workspace of daily activities specified by a set of upper-arm configurations. To formulate the problem, a new index is proposed for effective characterization of kinematic dexterity for wearable robots. Additionally, a set of constraints are defined to ensure that the optimal design can cover the desired workspace of the exoskeleton, while singular configurations and physical interferences are avoided. The formulated multi-objective optimization problem is solved using an evolutionary algorithm (Non-dominated Sorting Genetic Algorithm II) and the weighted sum approach. Among the resulted optimal points, the point with least sensitivity with respect to the variations of design variables is chosen as the final design.

Information

Type
Articles
Copyright
© Cambridge University Press 2019