Hostname: page-component-7b7567c8c-mnklg Total loading time: 0 Render date: 2026-11-13T10:56:07.789Z Has data issue: false hasContentIssue false

Model validation of a hexapod walker robot

Published online by Cambridge University Press:  17 August 2015

István Kecskés*
Affiliation:
Doctoral School of Applied Informatics and Applied Mathematics, Obuda University, Budapest, Hungary. E-mail: kecskes.istvan@gmail.com, ervinbur@appl-dsp.com
Ervin Burkus
Affiliation:
Doctoral School of Applied Informatics and Applied Mathematics, Obuda University, Budapest, Hungary. E-mail: kecskes.istvan@gmail.com, ervinbur@appl-dsp.com
Fülöp Bazsó
Affiliation:
Wigner RCP, Institute for Particle and Nuclear Physics, Budapest, Hungary. E-mail: bazso.fulop@wigner.mta.huSU-Tech College of Applied Sciences, Subotica, Serbia
Péter Odry
Affiliation:
SU-Tech College of Applied Sciences, Subotica, SerbiaCollege of Dunaujvaros, Dunaujvaros, Hungary. E-mail: odry@appl-dsp.com
*
*Corresponding author. E-mail: kecskes.istvan@gmail.com
Rights & Permissions [Opens in a new window]

Summary

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

Our complete dynamical simulation-model realistically describes the real low-cost hexapod walker robot Szabad(ka)-II within prescribed tolerances under nominal load conditions. This validated model is novel, described in detail, for it includes in a single study: (a) digital controllers, (b) gearheads and DC motors, (c) 3D kinematics and dynamics of 18 Degree of Freedom (DOF) structure, (d) ground contact for even ground, (e) sensors and battery model. In our model validation: (a) kinematical-, dynamical- and digital controller variables were simultaneously compared, (b) differences of measured and simulated curves were quantified and qualified, (c) unknown model parameters were estimated by comparing real measurements with simulation results and applying adequate optimization procedures. The model validation helps identifying both model's and real robot's imperfections: (a) gearlash of the joints, (b) imperfection of approximate ground contact model, (c) lack of gearhead's internal non-linear friction in the model. Modeling and model validation resulted in more stable robot which performed better than its predecessors in terms of locomotion.

Information

Type
Articles
Copyright
Copyright © Cambridge University Press 2015 

Kecskes supplementary material

Kecskés supplementary material 1

Download Kecskes supplementary material(Video)
Video 52.5 MB