Hostname: page-component-7b7567c8c-kwt9d Total loading time: 0 Render date: 2026-11-12T17:55:13.707Z Has data issue: false hasContentIssue false
  • English
  • Français

A novel approach to flexible robotic assembly systems

Published online by Cambridge University Press:  09 March 2009

Samir B. Billatos
Samir B. Billatos
Affiliation:
Acting Director of Manufacturing Engineering Programs, New Jersey Institute of Technology, University Heights, Newark, NJ 07102-1982 (USA)
Get accessRights & Permissions [Opens in a new window]

Summary

This paper presents a novel approach to designing and manufacturing of a universal gripper to be used with industrial robots in flexible assembly systems. Important issues that impact greatly on the efficiency of the gripper are also discussed in this paper. Such issues include the degree of compliance allowed by the robotic wrist and the way these grippers are actuated. The gripper has been proven to be extremely flexible and low in cost.

Keywords

Assembly systemsUniversal gripperIndustrial robots

Information

Type
Articles
Information
Robotica , Volume 13 , Issue 6 , November 1995, pp. 583 - 589
Copyright
Copyright © Cambridge University Press 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1.Billatos, S.B. and Basaly, N., “Design of Integrated Manufacturing and Robotics Cells” Fifth World Conference on Robotics ResearchCambridge, MA(1994) pp. 9:1–9:14.Google Scholar
2.Billatos, S.B. and Vahidi, S.“An Economic Investigation of Sensory Manipulators in Assembly Lines” Int. J. Robotics and Computer Integrated Manufacturing 6, No. 2, 167–177 (1989).Google Scholar
3.Jung, J., and Billatos, S.B., “An Expert System for Assembly Based on Axiomatic Design Principles” J. Intelligent and Robotics Systems, The Netherlands 8, 245–261 (1993).Google Scholar
4.Skinner, F., “Designing a Multiple Prehension Manipulator” J. Mechanical Engineering 97, No. 9, 30–37 (1975).Google Scholar
5.Chen, F.Y., “Gripping Mechanisms for Industrial Robots: An Overview” J. Mechanism and Machine Theory 17, No. 5, 299–311 (1982).Google Scholar
6.Fiorillo, A.S., Dario, P. and Bergamasco, M., “A Sensorized Robot Gripper” Int. J. of Robotics and Automation Systems 4, No. 1, 49–55 (1988).Google Scholar
7.Tsach, U., Chang, C.H. and Phillips, R.L., “Towards a Versatile Robotic Gripping System that feels the Grasp” 15th Conference on Manufacturing Automation, NSF(1989) pp. 269–273.Google Scholar
8.Billatos, S.B., “A Practical Application of Fluid Power Systems in Manufacturing” Robotica, 11, Part 5, 475–482 (1993).Google Scholar
9. NASA Technical Briefs, “Two-Thumbed Robot Hand” (February, 1989).Google Scholar