Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-18T09:18:09.573Z Has data issue: false hasContentIssue false

Omnidirectional locomotion and traction control of the wheel-driven, wall-climbing robot, Cromsci

Published online by Cambridge University Press:  11 April 2011

D. Schmidt*
Affiliation:
Robotics Research Lab, University of Kaiserslautern, Kaiserslautern, Germany
C. Hillenbrand
Affiliation:
Robotics Research Lab, University of Kaiserslautern, Kaiserslautern, Germany
K. Berns
Affiliation:
Robotics Research Lab, University of Kaiserslautern, Kaiserslautern, Germany
*
*Corresponding author. E-mail: dschmidt@cs.uni-kl.de
Rights & Permissions [Opens in a new window]

Summary

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

Safe and cost-efficient inspection of large concrete buildings is a great challenge for mobile robots. This paper presents the locomotion system of the climbing robot, Cromsci, which uses three steerable standard wheels and negative pressure adhesion. We will introduce criteria to avoid robot slip and tilt, and methods to enhance stability. One elementary part is the close-loop-controlled adhesion system with seven individual negative pressure chambers to balance out tilt or dynamic effects caused by leaky pressure chambers. The second part is the locomotion control using a special traction control mechanism to enhance robot navigation, which will also be presented here.

Information

Type
Articles
Copyright
Copyright © Cambridge University Press 2011