Hostname: page-component-7b7567c8c-m6dxt Total loading time: 0 Render date: 2026-11-18T14:31:15.044Z Has data issue: false hasContentIssue false

On the use of optical fibres in a pulsed time-of-flight laser rangefinder

Published online by Cambridge University Press:  09 March 2009

Seppo Nissilä
Affiliation:
University of Oulu, Department of Electrical Engineering, Electronics Laboratory Linnanmaa, 90570 Oulu (Finland),
Juha Kostamovaara
Affiliation:
University of Oulu, Department of Electrical Engineering, Electronics Laboratory Linnanmaa, 90570 Oulu (Finland),

Summary

The pulsed time-of-flight laser rangefinding technique has been used in many industrial measurement applications, including 3D-coordinate measuring devices, hot surface profilers and mobile robot sensors. Optical fibres, typically 1–10 m in length and 100–400 μm in diameter can be used to guide optical pulses to the separate sensing head of the measurement device. The use of a large multimode fibre may cause problems, however, when aiming at millimetre accuracy, as the construction and adjustment of the optics of the sensor head may affect the transit time linearity and measurement accuracy via multimode dispersion. Environmental effects, such as bending, vibration due to the moving sensing head and temperature, also cause measurement errors. The error sources are studied and characterized in this paper.

Information

Type
Articles
Copyright
Copyright © Cambridge University Press 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable