Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T08:56:18.471Z Has data issue: false hasContentIssue false

Planning of collision-free movements of a manipulator with dynamic constraints

Published online by Cambridge University Press:  09 March 2009

H. Ozaki
Affiliation:
Department of Mechanical Engineering Production Division, Faculty of Engineering, Kyushu University 36, 6–10–1, Hakozaki, Higashiku, Fukuoka (Japan)
A. Mohri
Affiliation:
Department of Mechanical Engineering Production Division, Faculty of Engineering, Kyushu University 36, 6–10–1, Hakozaki, Higashiku, Fukuoka (Japan)

Abstract

SUMMARY

In this paper the joint trajectories of a manipulator, which avoids obstacles in the work space and follows given path, are planned considering the dynamics of the manipulator system. The planning problem has four types of constraints: collision-free conditions, structural joints movable ranges, joints velocity limits and actuators input limits. This problem is formulated using artificial potentials which give feasible joint movements under these constraints. An algorithm using the linear programming is given to solve the problem. This algorithm enables the successive adjustment of the weighting factors of artificial potentials and gives the desired joint trajectories. The algorithm is effectively applied to the planar movements of a manipulator with four links and four degrees of freedom.

Information

Type
Articles
Copyright
Copyright © Cambridge University Press 1986

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable